What is eSUN eClean eClean is a specialized filament whose sole purpose is to purge and clean the hotend and extruder of your FDM/FFF 3D printer. Instead of laying down material to build parts, it acts as a maintenance tool: running it through your system helps remove residue from previous prints and any oozed or burnt filament that might be degrading performance. Key Benefits As filament residue (such as carbonized plastic, burnt particles, or old material) can build up in the hot-end area of your printer, it could compromise flow, cause underextrusion, or even completely clog the nozzle. Regular use of cleaning filaments like eClean helps maintain consistent extrusion, improved print quality, and reduces the risk of failed prints due to blockages. Technical Specifications Diameter: 1.75mmWeight: 100gRecommended Use Temperature: 160-300 °CColor: Natural (undyed) Usage Tips Heat the nozzle to a temperature in the recommended range that matches the previously used material (or slightly higher). Insert the eClean filament and slowly extrude it until you observe a clean and consistent flow. If residue is particularly stubborn, let the filament sit for a short time at a higher temperature, then purge. After cleaning, resume with regular filament, ensuring it is properly positioned for best feeding. Packaging and Storage The eClean spool is vacuum-sealed to keep moisture, dust, and other environmental contaminants away before use. This helps maintain its cleaning effectiveness and ensures reliability when you need it. Store in a dry place after opening. eSUN eClean is a cleaning filament designed to keep your 3D printer's nozzle and extruder free from buildup. With a recommended operating temperature of 160 to 300 °C, it can remove residue from a variety of filament types. The filament is vacuum-sealed to protect it from moisture and contamination. Ideal for improving filament feeding consistency and reducing clogging. Key Features Cleans accumulated filament residue in the hot-end Helps prevent nozzle clogging Wide temperature range (160-300 °C) Suitable for many filament materials Ensures smoother filament feeding Vacuum packaging for moisture and dust protection Features Manufacturer: eSUN Model: Clean175W01R1 EAN: 6922572242418 Buy eSUN Cleaning Filament at STRATO3D with fast shipping in Italy.
€9,90
High-Speed PrintingDesigned for efficiency, eSUN PLA-Basic enables print speeds up to six times faster than regular PLA. This makes it an excellent choice for users looking to complete prints quickly without compromising on quality. Wide CompatibilityEngineered to work seamlessly with most FDM 3D printers, including high-speed models like Bambu Lab, AnkerMake, Creality K1 series, Voron 2.4, and many others. Whether you have a professional setup or a hobbyist printer, this filament delivers consistent results. Reliable and Easy to PrintWith low shrinkage and minimal warping, this filament ensures a smooth, hassle-free printing experience. It produces high-precision prints with excellent adhesion and reduced stringing, making it suitable for detailed models and creative projects. Smooth, Tangle-Free FeedingEach spool is carefully wound to prevent tangles and overlaps, ensuring consistent and uninterrupted extrusion. The consistent diameter and tight tolerances help prevent clogging, providing a steady flow for high-quality prints. Secure Packaging for FreshnesseSUN PLA-Basic is packaged in a vacuum-sealed bag with a desiccant to maintain its optimal condition. This protects the filament from moisture and dust, preserving its quality until you're ready to use it. Perfect for both professionals and hobbyists, eSUN PLA-Basic offers a fast, reliable, and high-quality 3D printing experience. eSUN PLA-Basic is a high-speed 3D printer filament designed for fast and reliable prints. With optimized performance, it enables significantly higher print speeds than standard PLA, while maintaining high accuracy and quality. Compatible with a wide range of FDM 3D printers, it ensures smooth feeding and hassle-free printing. Key Features Prints up to six times faster than normal PLA Compatible with most standard and high-speed FDM 3D printers Low odor, no warping, low shrinkage, and minimal stringing High precision with a smooth, uniform finish Tangle-free spool with reliable extrusion and no clogging Comes vacuum-sealed for optimal storage and protection Features Manufacturer: eSUN Model: PLA-Basic175G1P1 EAN: 6922572211414 Weight: 1400 g Buy eSUN PLA-Basic on STRATO3D with fast shipping to Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€14,90 €11,18
STRATO3D's PLA is an easy-to-print material, suitable for any type of 3D printer. Polylactic Acid (PLA) is a biodegradable plastic made from renewable natural resources, making it environmentally friendly. It has good mechanical resistance and low shrinkage, which makes it printable even without a heated bed. Its naturally glossy finish makes it suitable for any application. Furthermore, PLA is completely non-toxic and odorless up to high temperatures. STRATO3D recommends PLA for quick and economical prints.
€25,00 €12,00 Unit price label€12,00/kg
Applications These reflective markers are ideal for professionals and hobbyists looking to improve the accuracy of their 3D scans. By providing consistent, easily detectable reference points, they help scanners capture detailed and precise models, making them essential for applications in manufacturing, engineering, design, and more. Enhance the accuracy and efficiency of your 3D scanning projects with Creality's 6mm reflective markers. Specifically designed for CR-Scan Otter and CR-Scan Raptor scanners, these markers provide reliable reference points, ensuring accurate shape detection and spatial tracking during the scanning process. Key Features 6mm diameter reflective markers for optimal scanner recognition. Compatible with Creality CR-Scan Otter and CR-Scan Raptor models. Improves scan accuracy by providing clear reference points for shape and position detection. Easy application and removal, facilitating an efficient workflow. Features Manufacturer: Creality Model: 4007010189 EAN: 6977905740345 Weight: 30 g Buy Creality 6mm 3D Scanner Reflective Markers 200 dots on STRATO3D with fast shipping to Italy.
€11,90
ABS+ ABS+ is an upgraded version of ordinary ABS, with significantly improved cracking and warping during the printing of large items. It has high strength, better toughness, excellent impact resistance, wear resistance, and heat resistance. Stable Dimensional Tolerance Minimal tolerance and low warping ensure consistent feeding and stable prints, good layer adhesion, less stringing, no bubbles, no cracking, easy handling, resulting in an exceptional surface finish and high precision. 1kg Filament Spool Tangle-free and clog-free, perfect roundness and very tight diameter tolerance, good winding, no overlapping or tangling. Melts well, feeds smoothly and consistently without clogging the nozzle or extruder. High Compatibility The strong and durable ABS+ filament is an engineering thermoplastic material. Suitable for printing parts with higher heat resistance requirements, such as industrial machinery parts, model makers, electronic appliances, and instrumentation. Vacuum-sealed packaging filament net weight: 1kg. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keeping your 3D printer filaments in optimal storage conditions and free from dust or dirt before opening the vacuum-sealed package. ABS+ is an upgraded version of ordinary ABS, with significantly improved cracking and warping during the printing of large items. It has high strength, better toughness, excellent impact resistance, wear resistance, and heat resistance. Key Features Stable Dimensional Tolerance Tangle-free and clog-free High Compatibility Vacuum-sealed packaging Features Manufacturer: eSUN Model: ABS+P175CW1 EAN: 6922572229228 Weight: 1440 g Buy eSUN ABS + on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code shall prevail for ordering purposes.
€16,90 €12,80
Material Properties SUNLU ABS filament is engineered to provide high impact resistance and toughness, making it ideal for demanding applications. It features an elongation at break of 7.8%, offering some flexibility without sacrificing strength. Its flexural strength of 55 MPa ensures the material maintains its structural integrity under pressure. Additionally, ABS's resistance to physical impact (Impact Notched: 25KJ/㎡) makes it suitable for a wide range of industrial and functional applications. Applications This filament is perfect for creating electronic enclosures, industrial prototypes, and functional parts that require durability and resilience. Whether you're working on a practical project or a creative design, SUNLU ABS filament is a reliable choice that delivers performance and ease of use. Post-processing One of the advantages of ABS is its smooth surface, which makes post-processing operations like sanding and painting straightforward. This makes it ideal for projects where appearance and finish are as important as functionality. SUNLU ABS Filaments is a versatile 3D printing material known for its strength and durability. It is perfect for creating robust and functional objects that require impact resistance and high temperature resistance. Thanks to its excellent toughness and ease of post-processing, ABS is a reliable choice for both professional and creative projects. Highlights High strength (notched impact 25KJ/) Excellent toughness Durable and robust Elongation at break 7.8% Flexural strength 55Mpa Resistant to temperatures up to 95°C Features Manufacturer: Sunlu Model: SL-Y-ABS-BK-1KG-A EAN: 6933582315993 Weight: 1350 g Buy Sunlu ABS on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€14,90 €13,61
STRATO3D's ABS is a robust and heat-resistant material, ideal for technical and functional prints. Acrylonitrile Butadiene Styrene (ABS) is one of the most widely used plastics in the manufacturing industry, valued for its hardness, rigidity, and good thermal resistance up to approximately 100°C.Thanks to its dimensional stability and ease of post-processing (sanding, painting, bonding with acetone), ABS is the ideal choice for mechanical prototypes, functional parts, and technical components. Material: ABS (Acrylonitrile Butadiene Styrene) Form: Granular pellets for FGF extruder Recommended printing temperature: 230–250°C Print bed: 90–110°C (heated bed recommended) Heat resistance: up to ~100°C Compatible with pellet printers (FGF)
€30,00 €14,00 Unit price label€14,00/kg
Normal UV Resin The material is rigid and strong. A tough material in a blade model can easily lead to model fragmentation, but an overly flexible material will be subject to deformation or tensile fracture during printing, which will affect the accuracy and aesthetics of the molding. The resin is stable in various weather conditions and is also easy to store, overcoming the shortcomings of other resins that easily dampen softening and environmental corrosion. Professional LCD molding resin The optimization of the LCD low-light source formation and printing efficiency are superior to the compatible DLP/LCD/SLA resin on the market. The resin is designed only for the LCD resin model; a DLP or SLA machine is not recommended. This resin ensures the strength of printed parts and non-excessive shrinkage, but also improves printing speed, reduces curing times, and improves the printing efficiency of LCD machines as much as possible. Strong adhesion and easy to remove. Not only a high success rate of printing and precision, but also minimizes the release force and resin adhesion, so that the model attached to the molding platform can be easily removed and the low viscosity facilitates the cleaning of the machine and the model. Storage method: keep away from light seals at room temperature (sunlight contains a lot of UV light, it will solidify the photosensitive resin. After testing, the light is not affected if it is not UV light). It is recommended to store at a room temperature of 15 ℃ -35 ℃, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or humidity can affect print quality. The sun contains a lot of UV light and solidifies the photosensitive resin. Usage: 1. Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight. 2. Wear gloves before use to avoid direct skin contact and keep the room ventilated. 3. Accidental contact, as soon as possible use plenty of water to rinse. If you do not feel well, seek timely medical attention. 4. Printed models must use high concentration alcohol to clean for about 30S (recommended concentration of 95% or more, the higher, the better). 5. Do not pour the resin in the resin tank into the unused resin, do not leave the resin in the resin tank for a long time without use to avoid resin contamination affecting the printing effect (for a long time without the resin can be introduced into airtight containers or sealed with plastic film to avoid shading). 6. The resin has a shelf life of up to 18 months. Anycubic standard UV resin is preferred by many consumers as it ensures the strength of printed parts and non-excessive shrinkage, but also improves printing speed, reduces curing times, and improves the printing efficiency of LCD machines as much as possible. Features: Main material: resin monomer and photoinitiator UV wavelength 365-410 nm Bottom exposure time/s 20-60 s, normal exposure time/s 5-15 s Features Manufacturer: Anycubic Model: SPTWH-101C EAN: 0605175698337 Weight: 1200 g Buy Anycubic Standard Resin White 1kg on STRATO3D with fast shipping in Italy.
€17,90
Normal UV resinThe material is rigid and strong. The strong material in the blade model can easily lead to model fragmentation, but too flexible material will be subject to deformation or tensile fracture of the print, which will affect the accuracy and aesthetics of the molding. The resin is stable in different weather conditions and is also easy to store, overcoming the shortcomings of other resins that easily dampen softening and environmental corrosion. Professional LCD molding resinOptimization of the formation of the LCD dim light source and printing efficiency are superior to the compatible DLP/LCD/SLA resin on the market. The resin is designed only for the LCD model of the resin, DLP or SLA machine is not recommended. This resin ensures the strength of printed parts and non-excessive shrinkage, but also improves printing speed, reduces curing times and improves the printing efficiency of LCD machines as much as possible. Strong adhesion and easy to detach. Not only a high success rate of printing and accuracy, but also minimizes the release force and adhesion of the resin, so that the model attached to the forming platform can be easily removed and the low viscosity facilitates cleaning of the machine and model. Storage method: keep away from light seals at room temperature (sunlight contains a lot of UV light, it will solidify the photosensitive resin. After testing, the light is not affected if it is not UV light). It is recommended to store at an ambient temperature of 15 ℃ -35 ℃, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or humidity can affect print quality. The sun contains a lot of UV light and solidifies the photosensitive resin. Usage:1. Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.2. Wear gloves before use to avoid direct skin contact and keep the room ventilated.3. Accidental contact, as soon as possible use plenty of water rinse. If you do not feel well, seek timely medical attention.4. Printed models must use high concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher, the better).5. Do not pour the resin in the resin tank into the unused resin, do not leave the resin in the resin tank for a long time without use to prevent resin pollution from affecting the printing effect (for a long time without the resin can be introduced into airtight containers or sealed with plastic film to avoid shading).6. The resin has a shelf life of up to 18 months. Anycubic standard UV resin is preferred by many consumers as it ensures the strength of printed parts and non-excessive shrinkage, but also improves printing speed, reduces curing times and improves the printing efficiency of LCD machines as much as possible. Features: Main material: monomer resin and photoinitiator UV wavelength 365-410 nm Bottom exposure times 20-60 s, normal exposure times 5-15 s Features Manufacturer: Anycubic Model: SPTCL-101C EAN: 0605175698375 Weight: 1200 g Buy Anycubic Standard Resin Clear 1kg on STRATO3D with fast shipping in Italy.
€17,90
Normal UV ResinThe material is rigid and strong. The resistant material in the blade model can easily lead to model fragmentation, but too flexible material will be subject to deformation or tensile fracture of the print, which will affect the accuracy and aesthetics of the molding. The resin is stable in different climatic conditions and is also easy to store, overcoming the shortcomings of other resins that easily dampen softening and environmental corrosion. Professional LCD molding resinOptimization of the formation of the LCD low-light source and printing efficiency are superior to the compatible DLP/LCD/SLA resin on the market. The resin is designed only for the LCD model of the resin; DLP or SLA machines are not recommended. This resin ensures the strength of printed parts and non-excessive shrinkage, but also improves printing speed, reduces curing times and improves the printing efficiency of LCD machines as much as possible. Strong adhesion and easy to detach. Not only a high success rate of printing and accuracy, but also minimizes the release force and adhesion of the resin, so that the model attached to the forming platform can be easily removed, and the low viscosity facilitates cleaning of the machine and model. Storage method: keep away from light seals at room temperature (sunlight contains a lot of UV light, it will solidify the photosensitive resin. After testing, the light is not affected if it is not UV light). It is recommended to store at an ambient temperature of 15 ℃ -35 ℃, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or humidity can affect print quality. The sun contains a lot of UV light and solidifies the photosensitive resin. Usage:1. Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.2. Wear gloves before use to avoid direct skin contact and keep the room ventilated.3. Accidental contact, as soon as possible use plenty of water to rinse. If you do not feel well, seek timely medical attention.4. Printed models must use high concentration alcohol to clean for about 30S (recommended concentration of 95% or more, the higher the better).5. Do not pour the resin in the resin tank into unused resin, do not leave the resin in the resin tank for a long time without use to avoid contamination of the resin affecting the printing effect (for a long time without the resin can be introduced into airtight containers or sealed with plastic film to avoid shading).6. The resin has a shelf life of up to 18 months. Anycubic's standard UV resin is preferred by many consumers as it ensures the strength of printed parts and non-excessive shrinkage, but also improves printing speed, reduces curing times and improves the printing efficiency of LCD machines as much as possible. Features: Main material: monomer resin and photoinitiator UV wavelength 365-410 nm Exposure times bottom 20-60 s, normal exposure times 5-15 s Features Manufacturer: Anycubic Model: SPTBK-101C EAN: 0605175698344 Weight: 1200 g Buy Anycubic Standard Resin Black 1kg on STRATO3D with fast shipping in Italy.
€17,90
Sunlu PLASunlu PLA filament is made from high-quality PLA material (polylactic acid), which boasts complete biodegradation and a lower melting temperature. With Sunlu PLA filament, a heated bed is not required, and there is no odor during printing. Smooth printing SUNLU PLA prints smoothly, with high purity, low shrinkage, and excellent layer adhesion for the needs of print projects requiring higher toughness for functional parts. Strict quality control The 1.75mm filament error is +0.02 filament. Neatly arranged, 100% tangle-free, vacuum-sealed packaging. Sunlu filament is kept dry by airtight packaging so that each roll of filament arrives in the user's hands in perfect condition; the quality of Sunlu filament is consistent. Compatible with your life. The filament is compatible with almost all FDM (FFF) printers, offering endless possibilities for creating artistic, DIY, and industrial print jobs. Print settings: Print Temp: 200-230°CTolerance: ±0.02mmPrint speed: 50-100 mm/sPlatform temperature: depends on the platform; Not required or 60-80°C Sunlu PLA filament is made from premium PLA material (polylactic acid), which boasts complete biodegradation and a lower melting temperature. With Sunlu PLA filament, a heated bed is not required, and there is no odor during printing. Key features: High precision No tangles No clogging No bubbles Features Manufacturer: Sunlu Model: SL-PLA Grey EAN: 6933582304812 Weight: 1260 g Buy Sunlu PLA Filament - 1.75mm - 1kg on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€14,90 €14,40
Standard UV Resin This resin is rigid and durable. While highly rigid materials can cause models to break during removal, overly flexible resins can deform or lose detail, compromising print accuracy and appearance. Anycubic resin maintains a balanced composition that performs reliably in various climate conditions and is easy to store. It avoids common problems of softening due to humidity and degradation from environmental exposure. Professional LCD Printing Resin Optimized for LCD printers in low light conditions, this resin offers greater efficiency than many competing DLP/LCD/SLA compatible resins. It is specifically designed for use with LCD printers and is not recommended for DLP or SLA machines. It ensures durable prints with minimal shrinkage, while improving printing speed, reducing curing times, and maximizing output quality. Strong Adhesion, Easy Removal This resin not only offers high print success rates and excellent accuracy, but also features low release force and minimal platform adhesion. Models are easy to remove from the build plate, and the low viscosity of the resin facilitates cleaning of both the printer and the models. Storage Instructions Store the resin in a sealed, light-protected container at room temperature. Avoid exposure to sunlight, as it contains high levels of UV light that can prematurely cure the resin. Ideally, store between 15°C and 35°C. Please note that lower temperatures increase the viscosity of the resin. Keep the resin sealed and away from dust and moisture, which can negatively affect print quality. Usage Guidelines Shake the bottle well before use. Do not use in direct sunlight. Wear gloves to avoid direct skin contact and ensure adequate ventilation. In case of accidental contact, rinse immediately with plenty of water. Consult a doctor if irritation persists. Clean printed models using high-concentration alcohol (at least 95%) for about 30 seconds. Do not return used resin from the vat to the original bottle. Avoid leaving unused resin in the vat for long periods. For longer storage, transfer to an airtight container or cover with clear film. Anycubic's standard UV resin is a popular choice among users because it offers durable, long-lasting prints with minimal shrinkage. Additionally, it increases print speed, reduces curing times, and maximizes the overall printing efficiency of LCD 3D printers. Features: Main ingredients: resin monomer and photoinitiator UV wavelength: 365–410 nm Bottom exposure time: 20–60 seconds Normal exposure time: 5–15 secondsFeatures Manufacturer: Anycubic Model: SPTGY-101C EAN: 0605175698320 Weight: 1200 g Buy Anycubic Standard Resin Gray 1kg on STRATO3D with fast shipping in Italy.
€17,90
STRATO3D's PETG is a filament with very high mechanical performance and is easy to print. A material that combines the advantages of ABS with those of PLA, offering high resistance to impact and chemical agents, excellent hardness, and low shrinkage. It has an extremely bright and glossy surface finish and, in non-opaque colors, is distinguished by its transparency. STRATO3D recommends PETG for modeling and components subject to frequent stress.
€26,79 €14,80 Unit price label€14,80/kg
The Bambu Lab filament cutter stopper for P2S ensures precise filament positioning and consistent cutting performance. An original and durable part designed for smooth operation and accurate material handling. The Bambu Lab filament cutter device for P2S is a precision component designed to work with the printer's filament cutting mechanism. It ensures accurate filament positioning and consistent cutting performance during material changes. As an original spare part, it guarantees a precise fit, smooth operation, and full compatibility with the P2S system. Key Features Original Bambu Lab spare part for P2S Supports precise and reliable filament cutting Ensures correct alignment during material changes Maintains smooth filament handling and feeding accuracy Durable construction for long-term performance Features Manufacturer: Bambu Lab Model: FAC171 EAN: 6937285507662 Weight: 140 g Buy the Bambu Lab Filament Cutter Stopper for P2S on STRATO3D with fast shipping in Italy.
€14,90
eSun PETG PETG filament is a high-performance 3D printer material with water resistance, chemical resistance, and high toughness. PETG combines the advantages of PLA and ABS. Stable dimensional tolerance Minimal tolerance and low warping to ensure smooth feeding and stable prints, good layer adhesion, less stringing, no bubbles, no cracking, easy handling, resulting in an exceptional surface finish and high precision. 1kg tangle-free and clog-free filament spool, perfect roundness and very tight diameter tolerance, good winding, no overlap or tangling. Melts well, feeds smoothly and consistently without clogging the nozzle or extruder. High compatibility PETG has the advantages of high toughness and good mechanical properties (like ABS), and also has the characteristics of easy printing and minimal warping (like PLA). Widely used in toys, stationery, electronic accessories, cosmetic containers, etc. Vacuum-sealed packaging filament Net weight: 1 kg. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments in optimal storage conditions and free from dust or dirt before opening the vacuum-sealed package. PETG filament is a high-performance 3D printer material with water resistance, chemical resistance, and high toughness. PETG combines the advantages of PLA and ABS. Key Features Stable dimensional tolerance Tangle-free and clog-free High compatibility Vacuum-sealed packaging Features Manufacturer: eSUN Model: PETG-P175SB1 EAN: 6922572264083 Weight: 1440 g Buy eSUN PETG on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code shall prevail for ordering purposes.
€17,90 €15,21
eSUN PLA-Cast is a specialized 3D printing filament developed for investment casting applications. Engineered to burn away cleanly during the casting process, it allows users to create detailed patterns that can be directly used for metal casting. The material combines the ease of printing associated with PLA with properties that make it suitable for professional casting workflows. With excellent detail reproduction and stable printing performance, PLA-Cast is ideal for producing complex geometries and precise models. It empowers creators, engineers, and jewelry designers to rapidly produce casting patterns without the need for traditional wax carving methods. Key Features Designed for lost-wax and lost-PLA casting processes Clean burnout with minimal ash residue Excellent detail reproduction for complex patterns Easy to print with standard PLA-like settings Suitable for jewelry, art, and metal prototypes Enables rapid production of casting patterns Features Manufacturer: eSUN Model: PLA-Cast175W1Y1 EAN: 6922572225350 Weight: 1100 g Buy eSUN PLA-Cast on STRATO3D with fast shipping in Italy.
€15,90
This premium thread milling bit is specifically designed for precision internal threading in a variety of materials. Engineered to fit the Makera Carvera and other CNC machines with a 1/8-inch collet, it ensures clean, smooth threads every time. Perfect for functional parts, prototyping, and custom mechanical builds. Key Features Compatible with CNC spindles with 1/8-inch collet Designed for precise internal threading Works with metal, plastic, and composite materials Optimized for use with Makera Carvera Long tool life with high wear resistance Suitable for small details and small-scale applications Features Manufacturer: Makera Model: C1-BIT-THREAD-M2-6 EAN: 6977641142489 Weight: 15 g Buy Makera - Thread Milling Bit - 1/8″ Shank on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code prevails for ordering purposes.
€11,90
Panchroma™ PLA – Speed without Compromise Panchroma™ PLA is Polymaker’s new flagship standard PLA filament, made for everyday 3D printing demands with a next-generation formula that sets a higher standard. It combines vibrant colors, smooth high-speed flow, and easy printability with enhanced mechanical performance, making it the ideal choice for makers of all skill levels working on creative projects, prototypes, or decorative parts. Panchroma™ PLA High-Speed Formula is engineered for fast, stable extrusion. The Hyper-flow formulation supports volumetric speeds up to 28mm³/s and print speeds up to 350mm/s, without loss of detail or surface quality. Whether you’re using a high-speed CoreXY machine or a standard beginner printer, Panchroma™ PLA adapts to your setup and delivers consistent results every time. Increased Strength & Ductility Panchroma™ PLA sets a higher mechanical standard than conventional PLA. With an elongation at break of approximately 19% compared to around 6% for standard PLA, it is significantly more ductile—prints are more likely to flex and bend before breaking rather than shattering. Impact strength is also nearly twice that of PolyLite™ PLA. While Panchroma™ PLA is slightly less stiff than PolyLite PLA, this tradeoff improves resilience and makes it more suitable for everyday-use parts that need to handle real-world use. High-Quality Results, Exceptional Reliability Panchroma™ PLA delivers crisp features and smooth surfaces that make every print look polished and professional. Polymaker’s advanced PLA formulation resists swelling and clogging in extruders, while the precise winding process eliminates filament tangles at the source, ensuring frustration-free printing even on long, complex projects. Every spool is backed by Polymaker’s stringent 23-stage quality control system and a 12-month warranty. Wide Variety of Colors Panchroma™ PLA comes in a wide variety of vibrant, uniform colors, from bold primary hues to soft pastels. The smooth, glossy finish ensures rich, even colors across the range, straight off the printer without post-processing. All Panchroma™ PLA colors are compatible with other Panchroma™ PLA effects, making color blending and multi-material printing simple. Perfect for Everyday Creative Projects Panchroma™ PLA is ideal for decorative pieces, miniatures, cosplay props, prototypes, educational models, and general-purpose prints. It offers clean details and smooth surfaces that make prints stand out, whether you’re displaying a finished showpiece or iterating on a functional prototype. Compatible with Any Printer Panchroma™ PLA works on virtually any FDM/FFF 3D printer using standard PLA settings—no enclosure needed, no special hotend required. Spool edges are hardened and precisely wound to roll smoothly in AMS and other multi-material systems for reliable, tangle-free feeding from the first layer to the last. Typical Applications Decorative Models & Display Pieces Miniatures & Cosplay Props Prototypes & Design Iterations Educational & Teaching Models Everyday General-Purpose Prints HueForge & Multi-Color Prints Printing Settings Print Temp: 190°C – 230°C Bed Temp: 25°C – 60°C Print Speed: Up to 350mm/s Cooling Fan: On Direct Drive Retraction: 1mm / 20mm/s Bowden Retraction: 3mm / 40mm/s Drying: 55°C for 6 hours (only if moisture has been absorbed) Handling and Storage Store in an airtight container with desiccant when not in use. If filament has absorbed moisture, dry at 55°C for 6 hours before printing. Please note that Panchroma™ PLA is not designed for high mechanical strength or long-term load-bearing applications—stronger materials like PETG, ABS, or engineering composites are recommended for these. Panchroma™ PLA is a next-generation PLA filament designed to deliver speed, reliability, and vibrant colors—without compromise. With a hyper-flow formulation supporting print speeds up to 350mm/s and volumetric flow up to 28mm³/s, it delivers crisp details and smooth surfaces in a fraction of the time compared to standard PLA. Stronger and more ductile than conventional PLA, it prints on any FDM/FFF printer without the need for special hardware. Available in a wide range of vibrant colors, precision-wound for tangle-free feeding, and compatible with AMS and other multi-material systems. Key Features Print Speeds up to 350mm/s: Volumetric flow up to 28mm³/s Increased Toughness & Ductility vs. Standard PLA: Approx. 19% vs. approx. 6% Elongation at Break Smooth, Glossy Finish with Clean Details Straight Out of the Printer Prints on Any FDM/FFF Printer with Standard PLA Settings: No Enclosure Needed Wide Variety of Vibrant, Uniform Colors Perfectly Wound for Tangle-Free Feeding: AMS Compatible Backed by Polymaker’s 23-Stage Quality Control and 12-Month Warranty Available in 1.75mm Features Manufacturer: Polymaker Model: CA19005 EAN: 6938936716822 Weight: 1400 g Buy Panchroma™ PLA from STRATO3D with fast shipping to Italy.Note: In case of discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€15,99 - €20,80
High-Speed Optimized Formula ePETG+HS features a specially optimized PETG formulation that cools and solidifies rapidly, enabling reliable high-speed printing. This optimization significantly reduces the risk of warping and stringing while ensuring smooth extrusion even at speeds up to 300mm/s. Functional Toughness and Durability Combining the mechanical properties of ABS with the printability of PLA, this filament delivers strong, impact-resistant prints that stand up to everyday stress and environmental exposure. Chemical and Waterproof Performance Designed for functional parts exposed to moisture or chemicals, ePETG+HS offers exceptional resistance to water, oils, and common solvents, making it ideal for enclosures, housings, snap-fit connectors, and outdoor prototypes. Exceptional Print Reliability Thanks to tight diameter tolerance, perfect winding, and optimized melt flow, the filament feeds smoothly without tangles or nozzle clogs. This results in consistent layer adhesion, minimal warping, and an exceptional surface finish with reduced stringing and bubbling. Packaging and Compatibility Each 1kg spool is vacuum sealed with a desiccant pack to protect it from moisture before use. Compatible with a wide range of FDM printers, including high-speed setups like Bambu Lab X1, AnkerMake M5, Creality K1/K1MAX, Flsun V400, and Raise3D, this filament offers broad compatibility and ease of use across configurations. eSUNePETG+HS is a high-performance PETG filament formulated for ultra-fast FDM printing with exceptional layer adhesion, toughness, and water and chemical resistance. Each 1kg spool is vacuum-sealed for optimal storage, ensuring smooth and clog-free extrusion. Ideal for functional prototypes, snap-fit parts, and assembly housings printed at speeds up to 300mm/s. Key Features High printing speeds up to approx. 300mm/s High toughness and superior mechanical strength Excellent chemical and water resistance Reduced adhesion and nozzle clogging Tight diameter tolerance for smooth feeding Vacuum-sealed spool with desiccant for moisture protection Features Manufacturer: eSUN Model: ePETG+HS-P175SW1 EAN: 6922572204867 Weight: 1440 g Buy eSUN PETG + High Speed on STRATO3D with fast shipping to Italy. Note: In case of a discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€17,90 €16,00
Unrivalled Strength and ToughnessAnycubic ABS-Like Resin Pro 2 is built for endurance and resilience. With an improved elongation at break of over 100% compared to its predecessor, this resin is ideal for creating structural parts, industrial prototype components, and fixtures that require high toughness. Finished models are not only robust but also wear-resistant, making them suitable for both functional and aesthetic applications. Exceptional Precision with Minimal Shrinkage This resin minimises distortion and warping through a reduced shrinkage rate, ensuring that prints maintain high precision. Sharp and vivid details come to life, delivering top-notch results for intricate designs and complex structures. Fast and Efficient Printing The resin's low viscosity and high fluidity significantly reduce curing times, allowing for faster reflow and lessening the likelihood of delamination. This improves backplane adhesion and minimises the risk of print failures, making the printing process more efficient and reliable. Optimised for Performance and Colour The resin is available in multiple colours, with a special upgrade to the black variant, which enhances colour richness and saturation. This ensures durable and visually striking results that maintain their quality over time. Wide Compatibility and Secure PackagingCompatible with a variety of LCD and DLP 3D printers operating within a 365-405 nm wavelength, the resin seamlessly integrates into diverse setups. The secure packaging with a leak-proof design ensures easy and worry-free handling during use and storage. A durable, precise, and eco-friendly resin designed for industrial prototyping, structural parts, and demanding DIY projects. Key Features Improved strength and durability for high-strength models Reduced shrinkage ensures exceptional precision Low viscosity allows for faster curing and easy moulding Low-odour formulation for a more comfortable printing experience Wide compatibility with LCD and DLP printers (365-405 nm) Enhanced black resin for deeper, richer colour saturation Features Manufacturer: Anycubic Model: SABP2GY-103A EAN: 6974662350947 Weight: 1200 g Buy Anycubic ABS-Like Resin Pro 2 on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€19,90 €16,00
eSun eABS+ High Speed is a modified ABS material with low shrinkage and excellent layer adhesion. The heat-resistant filament is optimized for high-speed printing to ensure performance and quality even at higher speeds. Key features Low shrinkage High strength and toughness Suitable for high-speed printing Features Manufacturer: eSUN Model: eABS+HS-P175H1 EAN: 6922572205000 Weight: 1440 g Buy eSUN ABS + High Speed on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code prevails for ordering purposes.
€18,90 €16,00
Applications These reflective markers are ideal for professionals and hobbyists looking to enhance the precision of their 3D scans. By providing consistent and easily detectable reference points, they help scanners capture detailed and accurate models, making them essential for applications in manufacturing, engineering, design, and more. Improve the accuracy and efficiency of your 3D scanning projects with Creality's 6mm reflective markers. Specifically designed for CR-Scan Otter and CR-Scan Raptor scanners, these markers provide reliable reference points, ensuring accurate shape detection and spatial tracking during the scanning process. Key Features 6mm diameter reflective markers for optimal scanner recognition. Compatible with Creality CR-Scan Otter and CR-Scan Raptor models. Enhances scan accuracy by providing clear reference points for shape and position detection. Easy application and removal, facilitating an efficient workflow. Features Manufacturer: Creality Model: 4007010188 EAN: 6977905740338 Weight: 35 g Buy Creality 6mm 3D Scanner Reflective Markers 400 dots on STRATO3D with fast shipping in Italy.
€19,90
eSun ePLA-Matte With an excellent matte printed surface, eSUN Matte PLA has a better printing effect and no obvious layer lines compared to regular PLA. Not easy to break. Its support structure is easy to peel off. High Toughness and Better Adhesion Compared with ordinary PLA filament, eSUN Matte PLA has higher toughness. Printed models are not easy to break or crack, and can be widely used in accessories, home decoration, toys, sculptures, shells, and COSPLAY. With the upgraded paper spool, eSUN Matte PLA has better adhesion and printability which improves the problem of bottom adhesion on the plate. Stable Dimensional Tolerance Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer adhesion, less stringing, no bubbles, easy handling, resulting in an outstanding surface finish and high precision. 1kg tangle-free and non-clogging filament spool, perfect roundness and very tight diameter tolerance, good winding, no overlapping or tangling. Melts well, feeds smoothly and consistently without clogging the nozzle or extruder, high successful print rate. Eco-friendly Packaging and Spool scraps are reused to produce recyclable spools and packaging boxes. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments in optimal storage conditions and free of dust or dirt before opening the sealed vacuum package. With an excellent matte printed surface, eSUN Matte PLA has a better printing effect and no obvious layer lines compared to regular PLA. Not easy to break. Its support structure is easy to peel off. Key Features High Toughness and Better Adhesion Stable Dimensional Tolerance Tangle-Free and Non-Clogging Eco-Friendly Packaging and Spool Features Manufacturer: eSUN Model: ePLA-Matte-P175DB1 EAN: 6922572201798 Weight: 1440 g Buy eSUN PLA -Matte on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€17,90 €16,81
Panchroma™ Matte is a bioplastic-based 3D printing filament engineered from the ground up to deliver the next generation of PLA, combining exceptional matte surface quality, excellent printability and print speeds of up to 300 mm/s. The unique open-pore surface structure hides layer lines even at higher layer heights, giving prints a clean, professional look without post-processing. Print reliably on any FDM/FFF printer without special requirements, in a wide range of vibrant colors. Formerly known as PolyTerra™ PLA: same great formula and surface finish, new product name. Key Features Uniquely matte surface finish that hides layer lines Bioplastic-based formula: degradable under industrial composting conditions Print speeds of up to 300 mm/s Prints on any FDM/FFF printer with standard PLA settings: no special hardware required Reinforced spools for AMS and multi-material system compatibility Fully recycled cardboard spool Available in 1.75 mm Features Manufacturer: Polymaker Model: CA04021 EAN: 6938936714989 Weight: 1400 g Buy Panchroma™ PLA Matte on STRATO3D with fast shipping in Italy.Note: In case of discrepancy between the variant description and the product code (SKU), the product code prevails for the purpose of the order.
€20,99 €17,50
You have seen 24 out of 339 products
Take advantage of our promotions and special offers on 3D printers, filaments, resins, spare parts, and accessories. We continuously update our offers with discounts on selected products, convenient bundles, and outlet prices on limited stock. Check this page often so you don't miss out on the best deals.
All products on offer are 100% guaranteed and covered by our technical support. Save without compromising on the quality you deserve.
