What is eSUN eClean eClean is a specialized filament whose sole purpose is to purge and clean the hotend and extruder of your FDM/FFF 3D printer. Instead of laying down material to build parts, it acts as a maintenance tool: running it through your system helps remove residue from previous prints and any oozed or burnt filament that might be degrading performance. Key Benefits As filament residue (such as carbonized plastic, burnt particles, or old material) can build up in the hot-end area of your printer, it could compromise flow, cause underextrusion, or even completely clog the nozzle. Regular use of cleaning filaments like eClean helps maintain consistent extrusion, improved print quality, and reduces the risk of failed prints due to blockages. Technical Specifications Diameter: 1.75mmWeight: 100gRecommended Use Temperature: 160-300 °CColor: Natural (undyed) Usage Tips Heat the nozzle to a temperature in the recommended range that matches the previously used material (or slightly higher). Insert the eClean filament and slowly extrude it until you observe a clean and consistent flow. If residue is particularly stubborn, let the filament sit for a short time at a higher temperature, then purge. After cleaning, resume with regular filament, ensuring it is properly positioned for best feeding. Packaging and Storage The eClean spool is vacuum-sealed to keep moisture, dust, and other environmental contaminants away before use. This helps maintain its cleaning effectiveness and ensures reliability when you need it. Store in a dry place after opening. eSUN eClean is a cleaning filament designed to keep your 3D printer's nozzle and extruder free from buildup. With a recommended operating temperature of 160 to 300 °C, it can remove residue from a variety of filament types. The filament is vacuum-sealed to protect it from moisture and contamination. Ideal for improving filament feeding consistency and reducing clogging. Key Features Cleans accumulated filament residue in the hot-end Helps prevent nozzle clogging Wide temperature range (160-300 °C) Suitable for many filament materials Ensures smoother filament feeding Vacuum packaging for moisture and dust protection Features Manufacturer: eSUN Model: Clean175W01R1 EAN: 6922572242418 Buy eSUN Cleaning Filament at STRATO3D with fast shipping in Italy.
€9,90
Sunlu PLASunlu PLA filament is made from high-quality PLA material (polylactic acid), which boasts complete biodegradation and a lower melting temperature. With Sunlu PLA filament, a heated bed is not required, and there is no odor during printing. Smooth printing SUNLU PLA prints smoothly, with high purity, low shrinkage, and excellent layer adhesion for the needs of print projects requiring higher toughness for functional parts. Strict quality control The 1.75mm filament error is +0.02 filament. Neatly arranged, 100% tangle-free, vacuum-sealed packaging. Sunlu filament is kept dry by airtight packaging so that each roll of filament arrives in the user's hands in perfect condition; the quality of Sunlu filament is consistent. Compatible with your life. The filament is compatible with almost all FDM (FFF) printers, offering endless possibilities for creating artistic, DIY, and industrial print jobs. Print settings: Print Temp: 200-230°CTolerance: ±0.02mmPrint speed: 50-100 mm/sPlatform temperature: depends on the platform; Not required or 60-80°C Sunlu PLA filament is made from premium PLA material (polylactic acid), which boasts complete biodegradation and a lower melting temperature. With Sunlu PLA filament, a heated bed is not required, and there is no odor during printing. Key features: High precision No tangles No clogging No bubbles Features Manufacturer: Sunlu Model: SL-PLA Grey EAN: 6933582304812 Weight: 1260 g Buy Sunlu PLA Filament - 1.75mm - 1kg on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€10,99 - €14,40
Creality CR-PETG - PETG Filament 1.75mm / 1kg.
€10,99 - €12,80
€11,20
Copymaster3D Tough UV ABS Like Resin - 500 g.
€11,20
Anycubic 1.75mm PLA Filament | Smooth Printing, Zero Waste, Vibrant Colors The PLA that never disappoints Anycubic PLA filament is made from renewable, plant-based raw materials: it is environmentally friendly, practically odorless during printing, and free of irritating emissions. Whether you're working in a small studio, classroom, or living room, you can print with peace of mind. Each spool is uniformly wound and carefully packaged to eliminate tangling issues from the start. The result? Consistent and smooth feeding from the first to the last meter, with high print success rates even in long sessions. Visible Precision With a diameter tolerance of less than ±0.02 mm, the filament ensures homogeneous extrusion layer by layer. No nozzle clogging, no irregular lines: just clean surfaces and precise dimensions, whether you're prototyping a mechanical component or printing a detailed miniature. Wide Range of Colors From classic tones (white, black, gray) to vibrant colors and more sophisticated shades. Anycubic PLA is available in a vast palette to satisfy every creative, educational, or professional project. Perfect for designers, teachers, makers, and enthusiasts of all levels. Smart ID: Automatic Identification with ACE Pro The spools are equipped with a smart identification chip that integrates natively with the Anycubic ACE Pro: the printer automatically recognizes the material and loads optimal printing parameters without any manual configuration. Less time on settings, more time printing. The Smart ID chip is optional: the filament also works perfectly on any standard 1.75mm FDM printer, with no additional configuration. Reusable Spool — Less Waste, More Stability The spool features a threaded connection system designed to ensure maximum stability when paired with spoolless filaments. You can keep and refill it, reducing plastic waste with each subsequent purchase. Recommended Printing Parameters Parameter Recommended Value Diameter 1.75 mm Nozzle Temperature 190 – 230 °C Bed Temperature 0 – 60 °C (cold bed accepted) Print Speed 40 – 100 mm/s Spool Weight 1 kg Who is this filament for? ✅ Beginners — easy to use, forgiving of calibration errors ✅ Makers and hobbyists — reliable for long sessions, great for accessories, gadgets, and decorations ✅ Educators and students — safe, odorless, available in many colors ✅ Designers and prototypers — dimensional accuracy for rapid iterations ✅ ACE Pro users — native Smart ID integration, zero configuration Certifications Anycubic PLA filament complies with RoHS, REACH, and SDS certifications, with corresponding reports available for download. Compatible with all FDM printers that support 1.75mm filaments. Note: In case of a discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€11,99 - €12,46
STRATO3D's PLA is an easy-to-print material, suitable for any type of 3D printer. Polylactic Acid (PLA) is a biodegradable plastic made from renewable natural resources, making it environmentally friendly. It has good mechanical resistance and low shrinkage, which makes it printable even without a heated bed. Its naturally glossy finish makes it suitable for any application. Furthermore, PLA is completely non-toxic and odorless up to high temperatures. STRATO3D recommends PLA for quick and economical prints.
€25,00 €12,00 Unit price label€12,00/kg
High-Speed PrintingDesigned for efficiency, eSUN PLA-Basic enables print speeds up to six times faster than regular PLA. This makes it an excellent choice for users looking to complete prints quickly without compromising on quality. Wide CompatibilityEngineered to work seamlessly with most FDM 3D printers, including high-speed models like Bambu Lab, AnkerMake, Creality K1 series, Voron 2.4, and many others. Whether you have a professional setup or a hobbyist printer, this filament delivers consistent results. Reliable and Easy to PrintWith low shrinkage and minimal warping, this filament ensures a smooth, hassle-free printing experience. It produces high-precision prints with excellent adhesion and reduced stringing, making it suitable for detailed models and creative projects. Smooth, Tangle-Free FeedingEach spool is carefully wound to prevent tangles and overlaps, ensuring consistent and uninterrupted extrusion. The consistent diameter and tight tolerances help prevent clogging, providing a steady flow for high-quality prints. Secure Packaging for FreshnesseSUN PLA-Basic is packaged in a vacuum-sealed bag with a desiccant to maintain its optimal condition. This protects the filament from moisture and dust, preserving its quality until you're ready to use it. Perfect for both professionals and hobbyists, eSUN PLA-Basic offers a fast, reliable, and high-quality 3D printing experience. eSUN PLA-Basic is a high-speed 3D printer filament designed for fast and reliable prints. With optimized performance, it enables significantly higher print speeds than standard PLA, while maintaining high accuracy and quality. Compatible with a wide range of FDM 3D printers, it ensures smooth feeding and hassle-free printing. Key Features Prints up to six times faster than normal PLA Compatible with most standard and high-speed FDM 3D printers Low odor, no warping, low shrinkage, and minimal stringing High precision with a smooth, uniform finish Tangle-free spool with reliable extrusion and no clogging Comes vacuum-sealed for optimal storage and protection Features Manufacturer: eSUN Model: PLA-Basic175G1P1 EAN: 6922572211414 Weight: 1400 g Buy eSUN PLA-Basic on STRATO3D with fast shipping to Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€12,30 - €12,80
Normal UV Resin The material is rigid and strong. A tough material in a blade model can easily lead to model fragmentation, but an overly flexible material will be subject to deformation or tensile fracture during printing, which will affect the accuracy and aesthetics of the molding. The resin is stable in various weather conditions and is also easy to store, overcoming the shortcomings of other resins that easily dampen softening and environmental corrosion. Professional LCD molding resin The optimization of the LCD low-light source formation and printing efficiency are superior to the compatible DLP/LCD/SLA resin on the market. The resin is designed only for the LCD resin model; a DLP or SLA machine is not recommended. This resin ensures the strength of printed parts and non-excessive shrinkage, but also improves printing speed, reduces curing times, and improves the printing efficiency of LCD machines as much as possible. Strong adhesion and easy to remove. Not only a high success rate of printing and precision, but also minimizes the release force and resin adhesion, so that the model attached to the molding platform can be easily removed and the low viscosity facilitates the cleaning of the machine and the model. Storage method: keep away from light seals at room temperature (sunlight contains a lot of UV light, it will solidify the photosensitive resin. After testing, the light is not affected if it is not UV light). It is recommended to store at a room temperature of 15 ℃ -35 ℃, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or humidity can affect print quality. The sun contains a lot of UV light and solidifies the photosensitive resin. Usage: 1. Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight. 2. Wear gloves before use to avoid direct skin contact and keep the room ventilated. 3. Accidental contact, as soon as possible use plenty of water to rinse. If you do not feel well, seek timely medical attention. 4. Printed models must use high concentration alcohol to clean for about 30S (recommended concentration of 95% or more, the higher, the better). 5. Do not pour the resin in the resin tank into the unused resin, do not leave the resin in the resin tank for a long time without use to avoid resin contamination affecting the printing effect (for a long time without the resin can be introduced into airtight containers or sealed with plastic film to avoid shading). 6. The resin has a shelf life of up to 18 months. Anycubic standard UV resin is preferred by many consumers as it ensures the strength of printed parts and non-excessive shrinkage, but also improves printing speed, reduces curing times, and improves the printing efficiency of LCD machines as much as possible. Features: Main material: resin monomer and photoinitiator UV wavelength 365-410 nm Bottom exposure time/s 20-60 s, normal exposure time/s 5-15 s Features Manufacturer: Anycubic Model: SPTWH-101C EAN: 0605175698337 Weight: 1200 g Buy Anycubic Standard Resin White 1kg on STRATO3D with fast shipping in Italy.
€12,80 - €17,90
Creality Ender PLA+ - PLA+ Filament 1.75mm / 1kg.
€12,80
eSUN PETG-Basic is the standard PETG filament from eSUN for FDM 3D printers. It combines the printing ease of PLA with the thermal and chemical resistance of PETG. Ideal for functional parts, containers and objects in contact with liquids.Available at STRATO3D, a distributor specialised in 3D printing materials. Manufacturer: eSUN Material: PETG Diameter: 1.75 mm Weight: 1 kg
€12,80
Anycubic PETG is an FDM 3D printing filament by Anycubic, selected by STRATO3D for reliable, high-quality prints. 1.75 mm diameter, 1 kg spool, available in several colours. Shipping from Italy.Brand: Anycubic
€12,80
Material Properties SUNLU ABS filament is engineered to provide high impact resistance and toughness, making it ideal for demanding applications. It features an elongation at break of 7.8%, offering some flexibility without sacrificing strength. Its flexural strength of 55 MPa ensures the material maintains its structural integrity under pressure. Additionally, ABS's resistance to physical impact (Impact Notched: 25KJ/㎡) makes it suitable for a wide range of industrial and functional applications. Applications This filament is perfect for creating electronic enclosures, industrial prototypes, and functional parts that require durability and resilience. Whether you're working on a practical project or a creative design, SUNLU ABS filament is a reliable choice that delivers performance and ease of use. Post-processing One of the advantages of ABS is its smooth surface, which makes post-processing operations like sanding and painting straightforward. This makes it ideal for projects where appearance and finish are as important as functionality. SUNLU ABS Filaments is a versatile 3D printing material known for its strength and durability. It is perfect for creating robust and functional objects that require impact resistance and high temperature resistance. Thanks to its excellent toughness and ease of post-processing, ABS is a reliable choice for both professional and creative projects. Highlights High strength (notched impact 25KJ/) Excellent toughness Durable and robust Elongation at break 7.8% Flexural strength 55Mpa Resistant to temperatures up to 95°C Features Manufacturer: Sunlu Model: SL-Y-ABS-BK-1KG-A EAN: 6933582315993 Weight: 1350 g Buy Sunlu ABS on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€12,99 - €13,61
The Anycubic High Speed PLA filament 1kg is optimised for fast printing up to 600 mm/s. 1.75 mm diameter, excellent surface finish, available in several colours. Specifications Manufacturer Anycubic Type High Speed PLA Diameter 1.75 mm Weight 1 kg Buy at Strato3D.it.
€12,99 - €14,99
Material Properties SUNLU High-Speed ABS filament boasts a heat deflection temperature of 91°C, making it highly resistant to deformation under heat. Its IZOD Impact Notched value of 10KJ/㎡ indicates its strong impact resistance, ensuring durability in demanding conditions. The filament also features a flexural modulus of 2100 MPa, providing good stiffness and strength during use. Applications This filament is perfect for creating electronic enclosures, industrial prototypes, and functional components. It is an excellent option for projects requiring rapid and efficient production without compromising quality or strength. Printing Performance Specifically designed for high-speed printing, this filament allows you to achieve print speeds of up to 350 mm/s while maintaining excellent surface finish and detail. Its dimensional stability minimizes the risk of warping and cracking, ensuring accurate and consistent prints throughout the process. SUNLU High-Speed ABS filament is engineered for rapid 3D printing, offering high-speed printing capabilities without compromising strength or surface quality. Ideal for high-efficiency manufacturing applications, it supports print speeds up to 350 mm/s while maintaining excellent dimensional stability and minimizing warping or cracking. With superior heat resistance, it's an excellent choice for both prototyping and functional components. Key Features Print speeds up to 350 mm/s Excellent dimensional stability Minimized warping and cracking Superior heat resistance, heat deflection temperature of 91°C Features Manufacturer: Sunlu Model: SL-Y-HSABS-GY-1KG-A EAN: 6933582316921 Weight: 1350 g Buy Sunlu High-speed ABS on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code takes precedence for ordering purposes.
€13,61 - €17,60
Mingda Outdoor Filament AdPETG Tough Light-Blocking is Mingda's opaque, impact-resistant PETG filament made specifically for outdoor use. Advanced formula for UV resistance and high durability in outdoor environments. Ideal for functional parts exposed to the elements.Available from STRATO3D, specialist distributor of technical 3D printing filaments. Manufacturer: Mingda Material: AdPETG Use: Outdoor Available in 1.75 mm and 2.85 mm, 500 g and 1 kg spools (see variant)
€13,64 - €16,12
Sunlu High-Speed Matte PETG Filament, white, 1.75mm diameter. 1kg spool. Elegant matte finish. High mechanical and chemical resistance. Optimized for fast printing.
€13,99
Sakata 3D Filaments' RE- filaments are made with materials recovered during the filament production process. A sustainable alternative that maintains the same technical properties as the original filament. Note: In case of discrepancy between the variant description and the product code (SKU), the product code shall prevail for order purposes.
€14,00
STRATO3D's ABS is a robust and heat-resistant material, ideal for technical and functional prints. Acrylonitrile Butadiene Styrene (ABS) is one of the most widely used plastics in the manufacturing industry, valued for its hardness, rigidity, and good thermal resistance up to approximately 100°C.Thanks to its dimensional stability and ease of post-processing (sanding, painting, bonding with acetone), ABS is the ideal choice for mechanical prototypes, functional parts, and technical components. Material: ABS (Acrylonitrile Butadiene Styrene) Form: Granular pellets for FGF extruder Recommended printing temperature: 230–250°C Print bed: 90–110°C (heated bed recommended) Heat resistance: up to ~100°C Compatible with pellet printers (FGF)
€30,00 €14,00 Unit price label€14,00/kg
Elegoo PLA Filament with RFID is a high-quality PLA filament from ELEGOO, ideal for FDM 3D printing. The RFID chip enables automatic material recognition on compatible printers. Available at STRATO3D, your Italian store specialising in 3D printing. Manufacturer: ELEGOO Category: 3D Printing Filaments SKU: 50.203.0813
€14,08
ABS+ ABS+ is an upgraded version of ordinary ABS, with significantly improved cracking and warping during the printing of large items. It has high strength, better toughness, excellent impact resistance, wear resistance, and heat resistance. Stable Dimensional Tolerance Minimal tolerance and low warping ensure consistent feeding and stable prints, good layer adhesion, less stringing, no bubbles, no cracking, easy handling, resulting in an exceptional surface finish and high precision. 1kg Filament Spool Tangle-free and clog-free, perfect roundness and very tight diameter tolerance, good winding, no overlapping or tangling. Melts well, feeds smoothly and consistently without clogging the nozzle or extruder. High Compatibility The strong and durable ABS+ filament is an engineering thermoplastic material. Suitable for printing parts with higher heat resistance requirements, such as industrial machinery parts, model makers, electronic appliances, and instrumentation. Vacuum-sealed packaging filament net weight: 1kg. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keeping your 3D printer filaments in optimal storage conditions and free from dust or dirt before opening the vacuum-sealed package. ABS+ is an upgraded version of ordinary ABS, with significantly improved cracking and warping during the printing of large items. It has high strength, better toughness, excellent impact resistance, wear resistance, and heat resistance. Key Features Stable Dimensional Tolerance Tangle-free and clog-free High Compatibility Vacuum-sealed packaging Features Manufacturer: eSUN Model: ABS+P175CW1 EAN: 6922572229228 Weight: 1440 g Buy eSUN ABS + on STRATO3D with fast shipping in Italy. Note: In case of discrepancy between the variant description and the product code (SKU), the product code shall prevail for ordering purposes.
€16,90 €14,08
High-quality 3D printer accessory. Available at STRATO3D, your Italian shop specialising in 3D printing.
€14,40
€14,40
PETG is a strong 3D printer filament. Made from polyethylene terephthalate modified with glycol, PETG is resistant to chemicals, moisture, and can withstand temperatures up to 80 °C without deforming. HighlightsLow shrinkage rate Bright color Excellent toughness Weather resistance Good adhesion
€14,40
You have seen 24 out of 507 products
The widest selection of filaments and resins for 3D printing available online in Italy. Our catalog includes PLA, PETG, ABS, TPU, Nylon, Polycarbonate, carbon fiber, Wood, Metal, and many other technical and exotic filaments, in 1.75 mm and 2.85 mm diameters.
For resin printing, you'll find standard, water washable, tough, flexible, and castable resins from leading brands like Sakata3D, Polymaker, BASF, and others. All materials are tested and selected for quality and printing consistency.
