Mainboards, drivers, modules and electronic components for 3D printers.
Electronics & Boards
-
Creality Creality 3D CR-30 Motherboard
Creality CR-30 Motherboard is the replacement mainboard for the Creality CR-30 belt 3D printer. Restore full control of your continuous-printing machine with original Creality components.Available at STRATO3D, official Creality distributor in Italy. Manufacturer: Creality Compatibility: CR-30 SKU: 4002020005
€50,00
-
Anycubic Anycubic Kobra 2 Pro Mainboard
Anycubic Kobra 2 Pro Mainboard is the replacement mainboard for the Anycubic Kobra 2 Pro 3D printer. It restores full control of the printer with original Anycubic components.Available at STRATO3D, official Anycubic distributor in Italy. Manufacturer: Anycubic Compatibility: Kobra 2 Pro SKU: S010140
€69,90
-
Bambu Lab Bambu Lab TPU Feed Assist Module
The Bambu Lab TPU Feed Assist module provides an active and constant push to the filament during TPU printing, eliminating feeding resistance and drag that cause jams and extrusion errors with flexible filaments. It allows you to freely position the filament spool, in a side-mounted dry box or any convenient location, without compromising feeding reliability. Compatible with the H2 series, X1 series, P1 series, and P2S. Important notice before purchase: This product provides the core extruder components, main control board, and various connectors. The module's housing and frame must be 3D printed by the user; print files are available on MakerWorld. Automatic AMS loading and unloading is not supported: please use an external spool holder. To keep the filament dry, it can be fed through the AMS HT TPU output. Key Features Active and constant filament push eliminates TPU feeding problems Freely position the spool: side-mounted, dry box, or any location Supports enclosed chamber printing via the AMS HT TPU output Can be installed on the left or right hotend (see limitations below) Compatible with the H2 series, X1 series, P1 series, and P2S Features Manufacturer: Bambu Lab Model: FAC234 EAN: 6937285511645 Weight: 294 g Buy the Bambu Lab TPU Feed Assist Module on STRATO3D with fast shipping in Italy.
€56,99
-
Bambu Lab L - ONE Desktop Robotic Arm - CyberBrick RC
L - ONE Desktop Robotic Arm - CyberBrick RC is a genuine Bambu Lab spare part/accessory for Bambu Lab 3D printers. A quality component selected by STRATO3D to keep your 3D printer always performing at its best. Fast shipping from Italy.
€32,39 - €52,19
-
Bambu Lab TH Board - P2S
TH Board - P2S is an original Bambu Lab spare part/accessory compatible with Bambu Lab P2S. A quality component selected by STRATO3D to keep your 3D printer always performing at its best. Fast shipping from Italy.
€32,99
-
Bambu Lab CyberBrick Hardware Kit
CyberBrick Hardware Kit is a genuine Bambu Lab spare part/accessory for Bambu Lab 3D printers. A quality component selected by STRATO3D to keep your 3D printer always performing at its best. Fast shipping from Italy.
€20,69 - €74,69
-
Anycubic Anycubic Kobra 2 Neo Mainboard
Wanhao CGR UV Lamp Panel (without lens) is the replacement UV panel without lens for the Wanhao CGR resin 3D printer. It restores the UV exposure intensity for optimal resin photopolymerization.Available at STRATO3D, distributor specialized in resin 3D printers. Manufacturer: Wanhao Compatibility: CGR SKU: 0327012
€29,90
-
Creality Creality 3D Sermoon D1 Mainboard
Creality 3D Sermoon D1 Mainboard is the replacement mainboard for the Creality Sermoon D1 3D printer. It restores full control of the printer with original Creality components.Available at STRATO3D, official Creality distributor in Italy. Manufacturer: Creality Compatibility: Sermoon D1
€60,00
-
Creality Creality CR-6 Max Main Board / Motherboard
The Creality CR-6 Max Main Board is the Creality replacement motherboard for the CR-6 Max. Original mainboard with pre-installed firmware. Available at STRATO3D, your Italian shop specialising in 3D printing. Manufacturer: Creality SKU: 4002020017
€56,25
-
FLSUN FLSUN S1/S1 Pro Upgrade Silent Module
FLSUN S1/S1 Pro Upgrade Silent ModuleThe FLSUN S1/S1 Pro Upgrade Silent Module by FLSUN is a quality accessory for 3D printers, designed to improve the performance, durability, and versatility of your 3D printing setup. Compatible with leading printers and systems on the market. ✅ Quality guaranteed – produced by FLSUN, a trusted brand in the 3D printing sector 🔧 Easy installation – ready to use with major 3D printers 🎯 Improve your prints – accessory designed to optimize the printing process 📦 Fast shipping – delivery throughout Italy from STRATO3D.it 🏷️ SKU: 200502000023 – available now at the best price Buy FLSUN S1/S1 Pro Upgrade Silent Module on STRATO3D.it – your Italian online store specializing in 3D printing, 3D scanners, laser engravers, and accessories. Competitive prices, fast shipping, and technical support in Italian.
€110,00
-
€59,90
-
Wanhao Wanhao Power Failure Sensor
Wanhao power failure sensor: it lets you resume printing after a blackout.Compatible with: Wanhao Duplicator i3 Plus Mk2, Duplicator 6 Plus and Duplicator 9.BenefitsIf the power goes out, the sensor detects the interruption and allows the printer to resume the job from the point where it stopped, so you do not lose hours of printing and material. Original Wanhao spare part Print resumes after a blackout Simple installation Manufacturer: Wanhao Manufacturer code: 0311004
€13,28
-
Snapmaker Snapmaker Toolhead PCB (for U1)
The Toolhead PCB is the central communication interface of the Snapmaker U1's toolhead: it transmits the signals from the mainboard and manages key components such as the temperature sensor and the fan. Designed for frequent toolhead changes: pogo pin connectors certified for 250,000 cycles. Easy maintenance: by replacing the board you restore a reliable connection and the correct operation of the toolhead.
€36,13
-
Snapmaker Snapmaker Hub Adapter Board (for U1)
Original HUB adapter board for the Snapmaker U1: it connects the toolheads to the printer's control system. Spare part to restore communication and power supply to the toolheads.Why replace itWhen an electronic board fails, replacing only the affected module is far cheaper than changing the whole assembly. The original spare part arrives pre-assembled and ready to plug in. Original spare part, pre-assembled Plug-and-play fitting, no soldering Restores original operation Manufacturer: Snapmaker Manufacturer code: 11008
€23,63
-
Flashforge Flashforge New Finder X-axis End Stop Switch Cable
Dedicated replacement cable for the X-axis end stop of the Flashforge New Finder: it connects the end stop to the motherboard and restores precise homing. Ideal if the original cable is damaged or gives intermittent contacts.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40000006002
€12,00
-
Flashforge Flashforge PCBA (LED)
Original Flashforge LED PCBA replacement board for the printer's internal lighting.Why replace itWhen an electronic board fails, replacing only the affected module is far cheaper than changing the whole assembly. The original spare part comes already assembled and ready to connect. Original spare part, already assembled Plug-and-play fitting, no soldering Restores the original operation Manufacturer: Flashforge Manufacturer code: 30002089003
€13,50
-
Elegoo Elegoo Proximity Switch for Neptune 4 Series
Genuine Elegoo proximity switch for the Neptune 4 series. Replacement part for the printer's levelling/homing system.Why replace itA faulty sensor causes homing errors, incorrect levelling or safety functions that no longer work. The genuine replacement part restores correct operation without modifications. Genuine replacement part, direct connection Restores homing, levelling and safety functions Easy installation Manufacturer: Elegoo Manufacturer code: 04.202.0015
€12,64
-
Bambu Lab Bambu Lab X1E Extruder Connection Board
The original Extruder Connection Board by Bambu Lab for the X1E is the central interface of the toolhead: it connects extruder and hotend, managing electrical signals and power supply so that all components work in sync. Stable connection for consistent print quality Direct replacement for the original board, minimal downtime Compatible with: Bambu Lab X1E
€12,90
-
Bambu Lab Bambu Lab Extruder Hall Sensor Board
Genuine Bambu Lab extruder Hall sensor board, a spare part for the Bambu Lab H2C printer. It detects position and movement inside the extruder, ensuring correct and reliable filament feeding. Genuine Bambu Lab spare part Compatible with: Bambu Lab H2C
€12,90
-
Phaetus Phaetus Rapido 2.0 PT1000 Thermistor
Replacement Phaetus PT1000 thermistor for the Phaetus Rapido 2.0 hotend. The PT1000 sensor provides precise, stable temperature readings even at high temperatures, essential for printing technical materials safely. Sensor type: PT1000 Compatible with: Phaetus Rapido 2.0 Original Phaetus spare part Note: check that the printer firmware is configured for a PT1000 sensor.
€15,01
-
xTool xTool M1 Mini Laser Drive Plate
Original xTool laser drive plate for the M1 Mini. Spare part for driving the laser module.FeaturesOriginal xTool spare partCompatible with M1 MiniLaser module driver
€24,32
-
xTool xTool M1 Main Control Board
Original xTool main control board for the M1. Spare part for the machine's control electronics.FeaturesOriginal xTool spare partCompatible with M1Main control board
€580,00
-
Wanhao Wanhao GR1 LCD Connecting/Adapter Board
Original Wanhao LCD connecting/adapter board for the GR1. Display connection spare part.FeaturesOriginal Wanhao spare partCompatible with GR1LCD connecting/adapter board
€10,10
-
Flashforge Flashforge Guider 3 Ultra / Guider 3 Plus Driver Board
Original Flashforge Driver Board for the Guider 3 Ultra / Guider 3 Plus. Genuine spare part to keep the printer running at its best.FeaturesOriginal Flashforge spare partCompatible with Guider 3 Ultra / Guider 3 Plus
€310,00
You have seen 24 out of 230 products