Ruthex 900M soldering iron with LED display, also ideal for installing threaded inserts in 3D prints. Fast heat-up and PID control: temperature adjustable from 150 to 500 °C, stable throughout the job. LED display: shows the current temperature and the cool-down phase; °C/°F selection and fine calibration. Auto Sleep: standby after 10 minutes of inactivity and automatic shut-off after a further 10 minutes, to extend tip life and cut power consumption.
€64,00
Original replacement resin tank for the Raise3D DF2 DLP printer, complete with storage cover. Excellent optical performance: transparent base for a sharp projection from the DLP light engine and uniform curing across the whole print area. Cover included: it protects the resin from light and contamination when the printer is not in use, with no need to empty the tank. Sturdy construction for repeated use.
€158,00
Phaetus PS M6 nickel-plated copper nozzle, 0.6 mm, for 1.75 mm filament. Rated up to 500 °C: ideal for engineering polymers such as PEEK High thermal conductivity: uniform temperature at the tip and stable extrusion, even at higher speeds Inner bore roughness below Ra 0.4 and full nickel plating: less friction and less material sticking M6 thread
€10,61
Set of 6 Revell Painta Standard brushes in sizes 00 to 4, for modellers and artists looking for a versatile, quality range. Sturdy bristles that keep their shape even with frequent use Ergonomic handles for a comfortable grip Excellent control and precision for every painting technique
€12,80
Upgrade your Elegoo Centauri Carbon 2 with the Micro Swiss FlowTech™ hotend, designed for high-flow printing and reliable everyday use. Original Bondtech CHT High Flow nozzle: up to 50 mm³/s volumetric flow rate. Thermistor matched to the printer: up to 350 °C with no firmware changes. The CHT design splits the filament path into several chambers for more uniform melting.
€121,60
Revell Plasto is a modelling filler that lets you achieve professional, flawless finishes on models, 3D prints and DIY projects. Easy to apply and quick drying.Use: clean the surface, spread the filler with a spatula, let it dry completely and sand until the surface is smooth.
€10,40
Revell Painta flat brush set in sizes 2, 6 and 10: the ideal tool for professional model painting. Perfect for laying down colour evenly over large surfaces, applying water decals and for the dry brushing technique, for realistic weathering effects.
€10,40
The Micro Swiss FlowTech™ hotend is designed specifically as an upgrade for the Creality K2 SE. It includes a heater core and NTC thermistor calibrated for the printer: no firmware changes, and the original Z height and build volume stay unchanged. Sealed, leak-proof nozzle assembly. Access to the entire FlowTech nozzle ecosystem for every printing need.
€115,20
Micro Swiss MK10 0.4 mm nozzle in 360 brass with an ultra-low-friction TwinClad XT coating, hard and abrasion resistant. Ideal for abrasive filaments such as carbon fibre or metal-filled.Compatible with: Flashforge Creator X, Flashforge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro/3D X, Wanhao Duplicator 4S/4X, Wanhao i3/i3 Plus, Wanhao D6.
€21,01
The Micro Swiss FlowTech™ hotend is a plug-and-play upgrade for the Creality K2 and K2 Pro. Built on the FlowTech ecosystem and on original Bondtech CHT technology, it combines high flow rate, simplified nozzle changes and a sealed nozzle assembly. With the included CHT High Flow nozzle it reaches up to 50 mm³/s: it makes the most of the K2 platform's high speed. CHT technology splits the filament flow into several channels for more uniform melting.
€121,60
Micro Swiss nozzle in 360 brass with TwinClad XT coating for Flashforge Creator Pro 3. The nickel composite coating offers extremely low friction, high hardness and abrasion resistance: ideal for carbon, metal or wood filled filaments.Compatible with: Flashforge Creator 3 Pro, Creator 4, Guider 3, Guider 3 Plus.
€21,01
Micro Swiss MK8 0.2 mm nozzle in 360 brass with TwinClad XT coating: an ultra-low-friction nickel composite (better than nickel with PTFE), very hard and abrasion resistant. Ideal for abrasive filaments such as carbon fibre, metal filled or wood.Compatible with: MakerBot Replicator 1/2/2x/5th Gen/Mini/z18, CraftBot 2/PLUS, BQ Witbox, BQ Prusa i3 Hephestos, Creality CR-10 and Ender with MK8 hotend.
€21,01
The Micro Swiss FlowTech™ hotend is a plug-and-play upgrade for the Creality Ender 5 Max, with a Hyper-CHT™ nozzle and a sealed, leak-proof hotend assembly. It increases print speed without sacrificing quality and makes nozzle maintenance easier. Hyper-CHT™ nozzle: six-channel internal geometry (patented Bondtech CHT technology) that roughly doubles the heating surface. Flow rate up to +95%, up to 62 mm³/s. Uniform heating from the inside: excellent layer adhesion even at high speed.
€120,00
Micro Swiss nozzle in 360 brass with TwinClad XT coating for Creality K1, K1 Max and CR-M4. The nickel composite coating offers extremely low friction, high hardness and abrasion resistance: ideal for carbon, metal or wood filled filaments. Made in the USA.
€21,01
Micro Swiss 0.60 mm nozzle designed specifically for the Creality CR-10S Pro: M6x0.75 thread compatible only with the original CR-10 Pro hotend, for a perfect leak-free fit. Hardened A2 tool steel: extremely durable, ideal for abrasive filaments (carbon fibre, glow-in-the-dark, metal-filled). TwinClad XT coating: an ultra-low-friction, high-hardness nickel composite that reduces material build-up and makes extrusion smoother.
€21,01
Micro Swiss FlowTech™ silicone socks for Bambu Lab printers (3-pack). They protect the hotend, keep the nozzle area clean, reduce filament sticking and help keep the temperature stable.BenefitsGood maintenance of the nozzle area prevents filament residue on the part, defects on the first lines and problems during colour changes. Original Micro Swiss product Cleaner parts and fewer defects Easy to replace Manufacturer: Micro Swiss Manufacturer code: M3029
€14,61
Original Flashforge LED PCBA replacement board for the printer's internal lighting.Why replace itWhen an electronic board fails, replacing only the affected module is far cheaper than changing the whole assembly. The original spare part comes already assembled and ready to connect. Original spare part, already assembled Plug-and-play fitting, no soldering Restores the original operation Manufacturer: Flashforge Manufacturer code: 30002089003
€13,50
Original replacement X-axis stepper motor cable for Flashforge New Finder.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40000004002
€12,00
Original replacement Y-axis end-stop cable for Flashforge Guider II.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40.999047001
€10,00
LED board connection cable for Flashforge New Finder.When to replace itIf the internal lighting does not turn on or works intermittently, the cause is often a crushed cable or a loose connector. Replacing the single original cable is the quickest and most cost-effective way to restore the connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40000253001
€12,00
Original replacement Z-axis end-stop cable for Flashforge Guider II.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40.999063001
€10,00
Original replacement Y-axis stepper motor cable for Flashforge Guider II.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40.999212001
€10,00
Dedicated replacement cable for the X-axis end stop of the Flashforge New Finder: it connects the end stop to the motherboard and restores precise homing. Ideal if the original cable is damaged or gives intermittent contacts.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40000006002
€12,00
Original replacement X-axis stepper motor cable for Flashforge Guider II.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40999210001
€10,00
You have seen 144 out of 2804 products
The go-to destination in Italy for 3D printer spare parts and accessories. You'll find everything you need to keep your machine in top condition: nozzles, hotends, heater blocks, thermistors, stepper motors, belts, print beds, sensors, fans, motherboards, and much more.
Guaranteed compatibility with major brands: Creality, Flashforge, Anycubic, Bambu Lab, Prusa, Elegoo, and others. With our continuously updated stock, you can resolve any technical issue quickly.
