The Bambu Lab Filament Track Switch is an X2D filament path switching module that removes the fixed bond between AMS units and nozzles. Once installed, any filament in any connected AMS can be freely routed to either the left or right nozzle, as assigned by the slicer. In conjunction with dynamic mapping support in Bambu Studio, the slicer can intelligently reassign filaments between nozzles layer-by-layer to minimize purge waste and reduce total print time. Installation is simple, and the printer remains fully compatible with up to 4 AMS 2 Pro units and 8 AMS HT units simultaneously. Note: Currently only compatible with Bambu Lab X2D. Support for H2C and H2D is planned for late 2026. Key Features Removes fixed bond between AMS and nozzle: any filament can feed any nozzle Dynamic mapping support for layer-by-layer nozzle reassignment in Bambu Studio Reduces purge waste and print times compared to static AMS routing Supports up to 4 AMS 2 Pro units + 8 AMS HT units simultaneously (via 4-in-1 PTFE adapter) 2 filament inputs, 2 filament outputs: designed for dual nozzle workflows Compatible with Bambu Lab X2D Features Manufacturer: Bambu Lab Model: SA016 EAN: 6937285513762 Weight: 232 g Buy the Bambu Lab X2D Filament Track Switch at STRATO3D with fast shipping in Italy.
€62,99
The Bambu Lab Extruder Filament Sensor for P2S monitors filament movement and presence to ensure safe and consistent operation. It is an original high-sensitivity component designed for stable and reliable performance. The Bambu Lab Extruder Filament Sensor for P2S is a precision sensing module that monitors filament movement in the extruder. It ensures accurate loading, unloading, and flow monitoring, helping to prevent print errors caused by jams, slips, or material run-out. Key Features Original Bambu Lab spare parts for P2S Accurate filament movement detection Improves reliability during loading and unloading Helps prevent jams and extrusion errors Durable design for long-term stability Features Manufacturer: Bambu Lab Model: DLB055 EAN: 6937285506917 Weight: 20 g Buy the Bambu Lab Extruder Filament Sensor for P2S on STRATO3D with fast shipping in Italy.
€17,90
The Anycubic Photon Mono M5s / M5s Pro Resin Vat is an OEM metal tank with a pre-installed release film (ACF or FEP), offering high UV transmission and long-lasting performance. It is easy to install and ideal for quick resin changes. The Anycubic Photon Mono M5s / M5s Pro Resin Vat is an official replacement metal tank with a pre-installed release film, designed for Photon Mono M5s and M5s Pro 3D printers. With ACF or FEP film options, it supports strong UV transmission and long-term print reliability. Key features: OEM resin vat for Photon Mono M5s / M5s Pro Built with durable metal structure Pre-installed ACF or FEP release film Ensures high UV light transmission and print quality Simple installation for quick resin color changes Improves printer uptime and reliability Features Manufacturer: Anycubic Model: S020162 Weight: 200 g Buy Anycubic Photon Mono M5s / M5s Pro Resin Vat on STRATO3D with fast shipping in Italy.
€60,00
Anycubic Photon Mono 2 Resin Vat Features Manufacturer: Anycubic Model: S020137 Weight: 200 g Buy Anycubic Photon Mono 2 Resin Vat on STRATO3D with fast shipping in Italy.
€41,44
€59,90
€191,84
Product on pre-order: you can order it right away, and it ships as soon as the item arrives at our warehouse.Creality SPARKX i7 PrintEase Kit is the complete maintenance kit for the Creality SPARKX i7 printer: all the wear parts in a single box, to keep the printer always efficient without having to hunt down the pieces one by one.Kit contents Hotend i7 0.2 mm ×1 Hotend i7 0.4 mm ×2 Hotend i7 0.6 mm ×1 Hotend i7 0.8 mm ×1 Toolhead filament cutter ×5 Hotend silicone sock ×3 Extruder assembly ×1 Nozzle cleaning strip ×5 Hotend heating assembly ×1 Extruder gear assembly ×1 Purge wiper ×1 Spare screw set ×1 Why choose it Stable extrusion and precise temperature by replacing worn components Four nozzle diameters to switch from detail prints (0.2 mm) to fast prints (0.8 mm) Simple installation and downtime kept to a minimum Compatibility: Creality SPARKX i7 Manufacturer: Creality SKU: 4007010226
€108,06
Product on pre-order: you can order it right away, and it ships as soon as the item arrives at our warehouse.Creality CFS Mini is Creality's compact spool holder, designed to keep filament tidy and off the work surface, with smooth feeding to the printer.Key features Small footprint: it sits on the desk next to the printer and frees up space on the work surface Steady feeding: a purpose-designed filament guide and low-friction rollers reduce jams, tangles and print interruptions Quick spool change: spools are mounted and swapped in a few seconds Ideal for small spools and leftovers: it comfortably handles 200–250 g spools and leftover filament, so nothing goes to waste Sturdy and lightweight: quality materials and virtually no maintenance Manufacturer: Creality SKU: 1002120020
€103,72
Modifi3D Pro 2 is an all-in-one tool for finishing 3D prints: it smooths surfaces, removes imperfections and stringing and refines details quickly and precisely, reducing sanding, scraping and cutting. Adjustable temperature from 160 to 480 °C with digital display Reaches working temperature in less than 10 seconds USB-C power supply
€119,81
Deluxe Materials Masking Magic Opaque is a precision masking liquid for finishing and multi-colour painting of 3D prints (FDM and resin) and models. It easily seals complex geometries, layer lines and fine details where masking tape will not stick. High-contrast opaque formula: you can easily check the coverage As it dries it forms a flexible barrier that prevents colour bleed: sharp lines with an airbrush or brush Peels off easily
€9,90
Original heated bed for the Voxelab Aquila, with a carborundum glass surface. It reaches 60–70 °C in just a few minutes, offers excellent adhesion and significantly reduces warping.BenefitsA flat print surface in good condition is the basis of a perfect first layer. The original spare part has exactly the same dimensions as the stock bed and installs without any modifications. Original dimensions, direct fit Excellent first-layer adhesion Easier part removal at the end of the print Manufacturer: Voxelab Manufacturer code: 20.001501001
€16,00
Wanhao power failure sensor: it lets you resume printing after a blackout.Compatible with: Wanhao Duplicator i3 Plus Mk2, Duplicator 6 Plus and Duplicator 9.BenefitsIf the power goes out, the sensor detects the interruption and allows the printer to resume the job from the point where it stopped, so you do not lose hours of printing and material. Original Wanhao spare part Print resumes after a blackout Simple installation Manufacturer: Wanhao Manufacturer code: 0311004
€13,28
Original toolhead USB cables (pack of 2) for Snapmaker U1: they connect the toolhead to the HUB board for communication and power supply. Wear-resistant construction, designed for continuous movement Secure connector that prevents incorrect installation Easy replacement
€13,63
Replacement build plate with mounting bracket for the Wanhao Duplicator D7 resin printer.BenefitsA flat build plate in good condition ensures correct adhesion of the first layers and resin prints that do not detach. The original spare part, complete with bracket, fits without any modifications. Original spare part with mounting bracket Direct fit on the D7 Reliable adhesion of the first layers Manufacturer: Wanhao Manufacturer code: 0308136
€12,80
Original part cooling fan for Snapmaker U1. It directs a constant airflow onto the freshly extruded material to solidify it quickly: cleaner overhangs and small details without deformation.Designed for the U1's toolhead change system
€18,62
The Toolhead PCB is the central communication interface of the Snapmaker U1's toolhead: it transmits the signals from the mainboard and manages key components such as the temperature sensor and the fan. Designed for frequent toolhead changes: pogo pin connectors certified for 250,000 cycles. Easy maintenance: by replacing the board you restore a reliable connection and the correct operation of the toolhead.
€36,13
Replacement throat for the Wanhao Duplicator 5 / 5S / 5S Mini.Why replace itA worn or clogged throat causes under-extrusion, heat creep and failed prints. The original spare part brings extrusion back to factory performance. Original spare part, direct fit Consistent, reliable extrusion Reduces clogs and heat creep Manufacturer: Wanhao Manufacturer code: 0304050
€10,10
Spring steel plate with textured PEI coating for Snapmaker U1. Reliable first layer: the rough surface ensures excellent adhesion and reduces warping and edge lifting. Easy release: with the plate cold, simply flex the sheet to remove the prints without tools. Durable: it withstands repeated heating cycles while staying flat.
€49,87
Original HUB adapter board for the Snapmaker U1: it connects the toolheads to the printer's control system. Spare part to restore communication and power supply to the toolheads.Why replace itWhen an electronic board fails, replacing only the affected module is far cheaper than changing the whole assembly. The original spare part arrives pre-assembled and ready to plug in. Original spare part, pre-assembled Plug-and-play fitting, no soldering Restores original operation Manufacturer: Snapmaker Manufacturer code: 11008
€23,63
Kit of 4 ceramic heaters for the hotend of the Snapmaker U1. They quickly bring the nozzle up to temperature and keep it stable throughout the print. Nozzle temperature up to 300 °C: compatible with most materials Stable thermal control for consistent extrusion and layer adhesion
€16,13
Original hotend cooling fan for the Snapmaker U1. It cools the upper part of the hotend so the filament melts only where it should, preventing premature softening in the heat break, clogs and failed prints.Why replace itA noisy, slow or stalled fan no longer cools the heatsink properly: heat creep and clogs increase. The original spare part restores the factory airflow. Original spare part, direct fit Consistent hotend cooling Reduces clogs and heat creep Manufacturer: Snapmaker Manufacturer code: 12031
€14,88
Ruthex M2 threaded inserts (Rx-M2x4, pack of 70 pcs) to be installed in 3D prints with heat using a soldering iron or with ultrasound, in blind or through holes. Geometry with opposed spiral knurling: high holding strength and balanced tightening torque Insertion guide for easier assembly Stable and reusable threaded connections
€12,00
Ruthex drill bit set designed specifically for threaded insert holes, in the sizes that ordinary drill sets do not include. 5 HSS drill bits from 3.2 to 8 mm for M2, M2.5, M3, M4, M5, M6 and 1/4" inserts Suitable for plastic (PLA, PETG, ABS), steel, aluminium, copper, brass, nickel and zinc
€14,00
Ruthex M4 threaded inserts (Rx-M4x8.1, pack of 50 pcs) to be installed in 3D prints with heat using a soldering iron or with ultrasound, in blind or through holes. Geometry with opposed spiral knurling: high holding strength and balanced tightening torque Insertion guide for easier assembly Stable and reusable threaded connections
€12,80
You have seen 120 out of 2804 products
The go-to destination in Italy for 3D printer spare parts and accessories. You'll find everything you need to keep your machine in top condition: nozzles, hotends, heater blocks, thermistors, stepper motors, belts, print beds, sensors, fans, motherboards, and much more.
Guaranteed compatibility with major brands: Creality, Flashforge, Anycubic, Bambu Lab, Prusa, Elegoo, and others. With our continuously updated stock, you can resolve any technical issue quickly.
