Genuine Snapmaker spare parts and accessories: hotends, nozzles, extruders, build plates, electronics and replacement components.
Snapmaker Spare Parts & Accessories
-
Snapmaker Snapmaker Toolhead USB Cable 2-Pack (for U1)
Original toolhead USB cables (pack of 2) for Snapmaker U1: they connect the toolhead to the HUB board for communication and power supply. Wear-resistant construction, designed for continuous movement Secure connector that prevents incorrect installation Easy replacement
€13,63
-
Snapmaker Snapmaker Part Cooling Fan (for U1)
Original part cooling fan for Snapmaker U1. It directs a constant airflow onto the freshly extruded material to solidify it quickly: cleaner overhangs and small details without deformation.Designed for the U1's toolhead change system
€18,62
-
Snapmaker Snapmaker Toolhead PCB (for U1)
The Toolhead PCB is the central communication interface of the Snapmaker U1's toolhead: it transmits the signals from the mainboard and manages key components such as the temperature sensor and the fan. Designed for frequent toolhead changes: pogo pin connectors certified for 250,000 cycles. Easy maintenance: by replacing the board you restore a reliable connection and the correct operation of the toolhead.
€36,13
-
Snapmaker Snapmaker U1 Textured PEI Steel Plate
Spring steel plate with textured PEI coating for Snapmaker U1. Reliable first layer: the rough surface ensures excellent adhesion and reduces warping and edge lifting. Easy release: with the plate cold, simply flex the sheet to remove the prints without tools. Durable: it withstands repeated heating cycles while staying flat.
€49,87
-
Snapmaker Snapmaker Hub Adapter Board (for U1)
Original HUB adapter board for the Snapmaker U1: it connects the toolheads to the printer's control system. Spare part to restore communication and power supply to the toolheads.Why replace itWhen an electronic board fails, replacing only the affected module is far cheaper than changing the whole assembly. The original spare part arrives pre-assembled and ready to plug in. Original spare part, pre-assembled Plug-and-play fitting, no soldering Restores original operation Manufacturer: Snapmaker Manufacturer code: 11008
€23,63
-
Snapmaker Snapmaker Ceramic Heaters Kit 4-Pack (for U1)
Kit of 4 ceramic heaters for the hotend of the Snapmaker U1. They quickly bring the nozzle up to temperature and keep it stable throughout the print. Nozzle temperature up to 300 °C: compatible with most materials Stable thermal control for consistent extrusion and layer adhesion
€16,13
-
Snapmaker Snapmaker Hot End Cooling Fan (for U1)
Original hotend cooling fan for the Snapmaker U1. It cools the upper part of the hotend so the filament melts only where it should, preventing premature softening in the heat break, clogs and failed prints.Why replace itA noisy, slow or stalled fan no longer cools the heatsink properly: heat creep and clogs increase. The original spare part restores the factory airflow. Original spare part, direct fit Consistent hotend cooling Reduces clogs and heat creep Manufacturer: Snapmaker Manufacturer code: 12031
€14,88
-
Snapmaker Snapmaker Toolhead Thick Filament Tube 6 mm 4-Pack (for U1)
4 original Snapmaker 6 mm filament tubes for the U1 toolhead. Filament path spare part.FeaturesPack of 4Diameter: 6 mmFor the Snapmaker U1 toolhead
€17,38
-
Snapmaker Snapmaker Stainless Steel Hot End (for U1)
Original Snapmaker stainless steel hot end for the U1 printer. Rugged extrusion spare part.FeaturesOriginal Snapmaker spare partCompatible with U1Material: stainless steel
€23,63
-
Snapmaker Snapmaker Basswood Sheet A250 - 200x200x1.5 mm - 5-pack
5 Snapmaker basswood sheets, 200x200x1.5 mm, for the A250: wood renowned for its workability — easy to cut, sand and paint — selected for Snapmaker laser and CNC modules. Ready out of the box for ornaments, scale models and custom signage.Features5 sheets, 200x200x1.5 mmBasswood: easy to cut, sand and paintOptimised for Snapmaker laser and CNCFor ornaments, models and signage
€15,98
-
Snapmaker Snapmaker Rotary Module Material Bundle (3 Pcs)
Snapmaker rotary module material bundle: includes 3 epoxy tooling blocks for rotary CNC and 3 kraft cylinders for rotary laser. Everything you need to start rotary machining.Features3 epoxy blocks for rotary CNC3 kraft cylinders for rotary laserFor the Snapmaker rotary module
€30,66
-
Snapmaker Snapmaker Laser Module - Artisan & Ray - 40W
Snapmaker 40 W laser module for Artisan and Ray: high-power diode laser with Air Assist included (pump included, controllable via Luban). Cuts 20 mm pinewood and 15 mm basswood plywood in one pass. Built-in quick swap, focus lever, crosshairs, laser safety shield, orientation detection and overheat protection.FeaturesPower: 40 W, cuts 20 mm pine in one passAir Assist with pump, controlled via LubanQuick swap, focus lever, crosshairsSafety shield and built-in protections
€523,75
-
Snapmaker Snapmaker Laser Engraving and Cutting Platform for 2.0 A250/A250T/F250
Aluminum grid platform for the laser on Snapmaker 2.0 A250/A250T/F250: firm, durable support that lets smoke escape and leaves room for laser penetration, reducing burn-in and excess charring on the material's back for cleanly outlined cuts. Open sides let you sweep debris out easily. 3-piece set.FeaturesAluminum alloy grid, 3 piecesLess burn-in and charring on the backSmoke flows freely, debris easy to removeFor Snapmaker 2.0 A250/A250T/F250
€52,00
-
Snapmaker Snapmaker U1 - Hardened Steel Hot End
A hardened steel hot end for the Snapmaker U1 3D printer. Compared with brass versions, the hardened steel build is designed to better withstand wear during extended use.FeaturesHardened steel build, wear resistant.Snapmaker spare part dedicated to the U1 model.Suitable for replacing the machine's original hot end.Technical specificationsMaterial: hardened steelCompatibility: Snapmaker U1Manufacturer: SnapmakerPart number: 22036
€74,88
-
Snapmaker Snapmaker U1 - Smooth PEI Steel Plate
The Snapmaker Smooth PEI Steel Plate is the flexible steel plate with a smooth PEI surface for the U1 3D printer. The smooth surface gives parts a glossy, even bottom finish. Features Flexible steel plate with a smooth PEI coating Dedicated to the Snapmaker U1 Direct replacement for the original plate Also useful as a second plate to alternate between prints Technical specifications Part number: 24044 Manufacturer: Snapmaker
€52,50
-
Snapmaker Snapmaker Auxiliary Cooling Fan (for U1)
Snapmaker Auxiliary Cooling Fan (for U1) is a Snapmaker 3D printing accessory offered by STRATO3D to improve the performance and maintenance of your printer.Brand: Snapmaker
€45,01
-
Snapmaker Snapmaker Part Cooling Fan Adapter Board 2-Pack (for U1)
Snapmaker Part Cooling Fan Adapter Board 2-Pack (for U1) is a Snapmaker 3D printing accessory offered by STRATO3D to improve the performance and maintenance of your printer.Brand: Snapmaker
€14,00
-
Snapmaker Snapmaker U1 Hardened Steel Hot End
Snapmaker U1 Hardened Steel Hot End is the replacement hardened steel hotend for the Snapmaker U1 3D printer. Designed for printing abrasive materials such as carbon fiber, glass fiber and reinforced filaments.Available at STRATO3D, a distributor specialising in digital manufacturing technologies. Manufacturer: Snapmaker Compatibility: U1 SKU: 22039
€73,13
-
Snapmaker Snapmaker U1 Carbon-Fiber Textured Graphic Effect Steel Sheet
Snapmaker U1 Carbon-Fiber Textured Graphic Effect Steel Plate is the steel plate with carbon fiber effect texture for the Snapmaker U1 3D printer. It offers excellent first layer adhesion, easy part removal and a premium look.Available at STRATO3D, distributor specialized in professional 3D printers. Manufacturer: Snapmaker Compatibility: U1 SKU: 24045
€21,02
-
Snapmaker Snapmaker J1 Print Cooling Fan Upgrade Kit
Snapmaker J1 Print Cooling Fan Upgrade KitThe Snapmaker J1 Print Cooling Fan Upgrade Kit by - is a quality accessory for 3D printers, designed to improve the performance, durability, and versatility of your 3D printing setup. Compatible with major printers and systems on the market. ✅ Guaranteed Quality – produced by -, a reliable brand in the 3D printing sector 🔧 Easy Installation – ready to use with major 3D printers 🎯 Improve Your Prints – accessory designed to optimize the printing process 📦 Fast Shipping – delivery throughout Italy from STRATO3D.it 🏷️ SKU: 12013 – available now at the best price Buy the Snapmaker J1 Print Cooling Fan Upgrade Kit on STRATO3D.it – your Italian online store specializing in 3D printing, 3D scanners, laser engravers, and accessories. Competitive prices, fast shipping, and technical support in Italian.
€98,00
-
Snapmaker Snapmaker Artisan 3-In-1 Add-ons
The Snapmaker Artisan 3D Printer (standard 3-in-1 add-ons) includes the other two functions of the Artisan 3-in-1 3D printer. Turn your Artisan 3D printer into a 3-in-1 machine. General Features: 10W high power laser engraving and cutting 200W CNC carving and cutting Protective laser enclosure included
€1.187,50
-
Snapmaker Snapmaker Rotary Module Bundle A350 / Artisan / Ray including stop button
Supplied with both the rotary module and the emergency stop button
€478,00
-
Snapmaker Snapmaker Rotary Module Bundle A250 including stop button
Supplied with both the rotary module and the emergency stop button
€699,00 €524,25
-
Snapmaker Snapmaker Dual Extrusion Module
The Snapmaker Dual Extrusion Module opens up new possibilities for your creativity by enabling you to print with two different materials or colors simultaneously. The module is compatible with Snapmaker 2.0 A350/F350/A250T/A250/F250/A150. Key features:3s Hot End Switch 300°C Dual Extrusion Soluble and Breakaway Supports Advanced Material Printing 4-Fan Cooling System Various Nozzle Size Compatibility Auto Leveling Smart Job Recovery
€478,00
You have seen 24 out of 69 products