Ruthex Spare Parts and Accessories

Ruthex M2 threaded inserts (Rx-M2x4, pack of 70 pcs) to be installed in 3D prints with heat using a soldering iron or with ultrasound, in blind or through holes. Geometry with opposed spiral knurling: high holding strength and balanced tightening torque Insertion guide for easier assembly Stable and reusable threaded connections

Read more less

Ruthex drill bit set designed specifically for threaded insert holes, in the sizes that ordinary drill sets do not include. 5 HSS drill bits from 3.2 to 8 mm for M2, M2.5, M3, M4, M5, M6 and 1/4" inserts Suitable for plastic (PLA, PETG, ABS), steel, aluminium, copper, brass, nickel and zinc

Read more less

Ruthex M4 threaded inserts (Rx-M4x8.1, pack of 50 pcs) to be installed in 3D prints with heat using a soldering iron or with ultrasound, in blind or through holes. Geometry with opposed spiral knurling: high holding strength and balanced tightening torque Insertion guide for easier assembly Stable and reusable threaded connections

Read more less

Ruthex 900M soldering iron with LED display, also ideal for installing threaded inserts in 3D prints. Fast heat-up and PID control: temperature adjustable from 150 to 500 °C, stable throughout the job. LED display: shows the current temperature and the cool-down phase; °C/°F selection and fine calibration. Auto Sleep: standby after 10 minutes of inactivity and automatic shut-off after a further 10 minutes, to extend tip life and cut power consumption.

Read more less

Ruthex M3 threaded insert – Rx-M3x5.7 - 100 pcs is a Ruthex accessory/spare part for 3D printers, designed to keep your machine always efficient and high-performing. Quality component, easy to install and compatible with the models indicated in the title.Fast shipping from Italy. For technical information or compatibility, contact STRATO3D support.

Read more less

Ruthex M5 threaded insert – Rx-M5x9.5 - 50 pcs is a Ruthex accessory/spare part for 3D printers, designed to keep your machine efficient and high-performing at all times. A quality component, easy to install and compatible with the models listed in the title.Fast shipping from Italy. For technical information or compatibility, contact STRATO3D support.

Read more less

Ruthex M6 threaded insert – Rx-M6x12.7 - 25 pcs is a Ruthex accessory/spare part for 3D printers, designed to keep your machine efficient and high-performing at all times. A quality component, easy to install and compatible with the models listed in the title.Fast shipping from Italy. For technical information or compatibility, contact STRATO3D support.

Read more less

Ruthex M5 Short threaded insert – Rx-M5Sx5.8 - 50 pcs is a Ruthex accessory/spare part for 3D printers, designed to keep your machine efficient and high-performing at all times. A quality component, easy to install and compatible with the models listed in the title.Fast shipping from Italy. For technical information or compatibility, contact STRATO3D support.

Read more less

Ruthex M3 threaded insert for VORON – Rx-M3x5x4 - 100 pcs is a Ruthex accessory/spare part for 3D printers, designed to keep your machine efficient and high-performing at all times. A quality component, easy to install and compatible with the models listed in the title.Fast shipping from Italy. For technical information or compatibility, contact STRATO3D support.

Read more less

Ruthex M6 threaded insert – Rx-M6x6.8 - 25 pcs is a Ruthex accessory/spare part for 3D printers, designed to keep your machine always efficient and high-performing. A quality component, easy to install and compatible with the models listed in the title.Fast shipping from Italy. For technical information or compatibility, contact STRATO3D support.

Read more less

Ruthex M10 threaded insert – Rx-M10x12.7 - 10 pcs is a Ruthex accessory/spare part for 3D printers, designed to keep your machine always efficient and high-performing. A quality component, easy to install and compatible with the models listed in the title.Fast shipping from Italy. For technical information or compatibility, contact STRATO3D support.

Read more less

Ruthex Weller series ET & LT - WE1010, WP80, WEP70 compatible Soldering Tips Adapter is a Ruthex accessory/spare part for 3D printers, designed to keep your machine always efficient and high-performing. A quality component, easy to install and compatible with the models listed in the title.Fast shipping from Italy. For technical information or compatibility, contact STRATO3D support.

Read more less

M2.5 Ruthex Rx-M2.5x5.7 threaded inserts, supplied in a pack of 70 pieces. They are designed for heat-set installation into 3D printed parts and create a reusable metal thread, far stronger than a thread cut directly into plastic. A size suited to electronics, enclosures and small-scale assemblies.FeaturesM2.5 thread for 3D printed partsHeat-set installation into the materialReusable metal thread, resistant to pull-outPack of 70 piecesTechnical specificationsModel: Rx-M2.5x5.7Thread: M2.5Length: 5.7 mmQuantity: 70 piecesCode: GE-M25x57-001

Read more less

M8 Ruthex Rx-M8x12.7 threaded inserts, supplied in a pack of 20 pieces. They are designed for heat-set installation into 3D printed parts and create a reusable metal thread, far stronger than a thread cut directly into plastic. Useful in every project involving repeated assembly and disassembly.FeaturesM8 thread for 3D printed partsHeat-set installation into the materialReusable metal thread, resistant to pull-outPack of 20 piecesTechnical specificationsModel: Rx-M8x12.7Thread: M8Length: 12.7 mmQuantity: 20 piecesCode: GE-M8x127-001

Read more less

Pack of 100 M3 threaded inserts by Ruthex in the short version (Rx-M3Sx4.0). The inserts provide a solid metal thread inside 3D printed parts, where plastic alone would not hold up over time.FeaturesM3 thread, short versionPack of 100 piecesDesigned for use on 3D printed componentsTechnical specificationsItem code: Rx-M3Sx4.0Thread: M3Quantity: 100 pcs

Read more less

Pack of 50 M4 threaded inserts by Ruthex in the short version (Rx-M4Sx4.0). The inserts provide a solid metal thread inside 3D printed parts, where plastic alone would not hold up over time.FeaturesM4 thread, short versionPack of 50 piecesDesigned for use on 3D printed componentsTechnical specificationsItem code: Rx-M4Sx4.0Thread: M4Quantity: 50 pcs

Read more less

Ruthex TS100 / TS101 / PINECIL Soldering Tips Adapter is a Ruthex 3D printing accessory offered by STRATO3D to improve the performance and maintenance of your printer.Brand: Ruthex

Read more less

Ruthex ERSA 832 842 102 i-Tool Pico PTC 70 Soldering Tips Adapter is a Ruthex 3D printing accessory offered by STRATO3D to improve the performance and maintenance of your printer.Brand: Ruthex

Read more less

Ruthex M2 / M3 / M4 / M5 Threaded Insert Assortment Box - 270pcs The Ruthex M2 / M3 / M4 / M5 Threaded Insert Assortment Box - 270pcs by Ruthex is a quality accessory for 3D printers, designed to improve the performance, durability, and versatility of your 3D printing setup. Compatible with major printers and systems on the market. ✅ Guaranteed Quality – produced by Ruthex, a reliable brand in the 3D printing industry 🔧 Easy Installation – ready to use with major 3D printers 🎯 Enhance Your Prints – accessory designed to optimize the printing process 📦 Fast Shipping – delivery throughout Italy from STRATO3D.it 🏷️ SKU: GE-KASTEN-001 – available now at the best price Purchase Ruthex M2 / M3 / M4 / M5 Threaded Insert Assortment Box - 270pcs on STRATO3D.it – your Italian online store specializing in 3D printing, 3D scanners, laser engravers, and accessories. Competitive prices, fast shipping, and technical support in Italian.

Read more less

Ruthex Soldering Tips for thread inserts – M2 / M2.5 / M3 / M4 / M5 / M6 / M8 The Ruthex Soldering Tips for thread inserts – M2 / M2.5 / M3 / M4 / M5 / M6 / M8 by Ruthex is a quality accessory for 3D printers, designed to improve the performance, durability, and versatility of your 3D printing setup. Compatible with major printers and systems on the market. ✅ Guaranteed Quality – produced by Ruthex, a trusted brand in the 3D printing sector 🔧 Easy Installation – ready to use with major 3D printers 🎯 Improve Your Prints – accessory designed to optimize the printing process 📦 Fast Shipping – delivery throughout Italy from STRATO3D.it 🏷️ SKU: LOE-SET-012 – available now at the best price Buy Ruthex Soldering Tips for thread inserts – M2 / M2.5 / M3 / M4 / M5 / M6 / M8 on STRATO3D.it – your Italian online store specializing in 3D printing, 3D scanners, laser engravers, and accessories. Competitive prices, fast shipping, and technical support in Italian.

Read more less

Ruthex Deburrer The Ruthex Deburrer by Ruthex is a quality accessory for 3D printers, designed to improve the performance and versatility of your 3D printing setup. ✅ Guaranteed quality – produced by Ruthex, a reliable brand in the 3D printing industry 🔧 Easy installation – ready to use with major 3D printers 🎯 Improve your prints – accessory designed to optimize the printing process 📦 Fast shipping – delivery throughout Italy from STRATO3D.it 🏷️ SKU: ENT-11SET-002 – available now at the best price Buy Ruthex Deburrer on STRATO3D.it – your Italian online store specializing in 3D printing. Competitive prices, fast shipping, and technical support in Italian.

Read more less