Replacement heater cartridge for the Creality CR-5 Pro. Voltage: 24 V Power: 40 W Dimensions: 6 x 20 mm Cable length: 950 mm Why replace itA faulty heater cartridge causes temperature errors, under-extrusion and interrupted prints. The genuine spare part ensures fast, stable heating. Genuine spare part with identical specifications Stable temperature for consistent extrusion Easy replacement Manufacturer: Creality Manufacturer code: 3103010021
€10,00
Replacement Z-axis threaded rod for Creality Ender-3. It ensures smooth and precise vertical movement.Why replace itBent or worn threaded rods and loose couplings cause z-wobble, horizontal lines on the walls and uneven layer height. The original spare part ensures smooth and consistent vertical movement. Original spare part for direct installation Smooth and even Z-axis movement Reduces z-wobble and wall defects Manufacturer: Creality Manufacturer code: 4004130005
€12,00
245 x 255 x 4 mm carborundum glass bed for the Creality CR-6 SE. Excellent adhesion while printing and easy part removal once the bed is cold, with a flat, scratch-resistant surface.BenefitsA flat build surface in good condition is the foundation of a perfect first layer. The genuine spare part matches the exact dimensions of the stock bed and installs without any adjustments. Original dimensions, direct fit Excellent first layer adhesion Easier part removal once printing is done Manufacturer: Creality Manufacturer code: 4004090032
€16,82
Replacement heat block for Creality CR-10S Pro. It ensures stable thermal behaviour, reduces heat creep and protects the hot and cold zones of the hotend. The precise fit promotes consistent extrusion and extends the life of the components.
€12,00
305 x 235 mm build surface sticker for the Creality CR-10S Mini. Textured surface that improves first layer adhesion and protects the bed.BenefitsA flat build surface in good condition is the foundation of a perfect first layer. The genuine spare part matches the exact dimensions of the stock bed and installs without any adjustments. Original dimensions, direct fit Excellent first layer adhesion Easier part removal once printing is done Manufacturer: Creality Manufacturer code: 3205100040
€12,00
Metal mounting bracket by BIGTREETECH (BIQU) for E3D V6, Volcano, Mosquito and Dragon hotends, compatible with Creality Ender-3 and CR-10 series printers. It allows an aftermarket hotend to be installed firmly and precisely on the original carriage. Metal construction, rigid and durable Compatible with E3D V6 / Volcano / Mosquito / Dragon hotends
€11,20
Mounting set in PA12 for the Bondtech LGX Lite extruder with Copperhead hotend (groove mount).Contents: 1x PA12 front mounting plate 1x PA12 reinforcement bracket 2x M3 hex nut 2x M3x10 low-head screw 3x M3x6 low-head screw BenefitsThe set lets you mount the LGX Lite extruder directly onto the Copperhead hotend with groove mount fitting, keeping the assembly compact, rigid and correctly aligned. Genuine Bondtech product Parts printed in heat-resistant PA12 Mounting hardware included Manufacturer: Bondtech Manufacturer code: 15302
€26,00
Genuine Bondtech replacement shaft assembly for Bondtech extruders. A precision spare part to restore filament traction and the extruder's original performance.Why replace itWorn extruder gears and components reduce grip on the filament: under-extrusion, slipping and extruder clicking appear. The genuine Bondtech spare part restores precise, consistent traction. Genuine Bondtech spare part Precision machining Consistent, reliable filament traction Manufacturer: Bondtech Manufacturer code: 15021
€11,81
Flexible build plate for BIQU B1, double-layer: spring steel sheet with PEI coating and adhesive magnetic base. It guarantees excellent adhesion during printing and extremely easy part removal by flexing the sheet. Spring steel sheet with PEI Magnetic base included Not resistant above 70 °C: ideal for non-high-temperature filaments (PLA, PETG, TPU)
€16,00
Replacement idler pulley for the Creality CR-10 3D printer. Inner diameter 3,92 mm. Ensures correct belt travel and precise axis movement.Why replace itWith use, belts and pulleys stretch or wear out: play, ghosting, inaccurate dimensions and uneven surfaces appear. The genuine spare part restores correct tension and precise axis movement. Genuine spare part, identical in size to the stock component Precise, repeatable movement Reduces vibration, play and ghosting Manufacturer: Creality Manufacturer code: 400202001
€12,34
Genuine Bondtech brass motor gear with 17 teeth and M3x3 set screw, used in BMG, Single and Dual direct extruders.During installation, check that the set screw does not interfere with the secondary plastic gear.Why replace itWorn extruder gears and components reduce grip on the filament: under-extrusion, slipping and extruder clicking appear. The genuine Bondtech spare part restores precise, consistent traction. Genuine Bondtech spare part Precision machining Consistent, reliable filament traction Manufacturer: Bondtech Manufacturer code: 15002B
€12,00
Anycubic ACE 2 Pro is the key to multicolour printing on Anycubic Kobra printers. As well as drying the filament, the unit works as a material change system: by connecting several modules you can increase the number of colours available in a single project and create vivid, detailed models with no manual intervention.Compatible with Kobra 3, Kobra 3 Max and Kobra 4 Series. The active hot air circulation restores the filament's properties and prevents problems such as stringing; the enclosed structure protects the spools from dust, extends the nozzle's life and ensures a stable feed even on long prints.
€340,00
The Bambu Lab AMS 2 Pro Feeder Unit is the replacement filament feeder module for the AMS 2 Pro system. Each AMS 2 Pro contains four feeder units, each with its own motor and gears to push the filament forward or retract it back towards the spool.A built-in sensor detects filament insertion and automatically starts loading into the AMS 2 Pro system; during retraction the unit works in reverse. By replacing the module you restore the feeding and detection functions of an existing slot.
€51,90
Genuine Creality 42-48 stepper motor for the CR-10 SE. Direct replacement to restore precise, reliable movement of the axes and extruder.Why replace itA worn or damaged stepper motor causes skipped steps, shifted layers, noise and imprecise movement. The genuine spare part has the same electrical and mechanical characteristics as the stock motor: it fits without modifications and requires no firmware setting changes. Genuine spare part, direct fit Restores precise positioning and smooth movement Same specifications as the stock motor: no firmware changes Manufacturer: Creality Manufacturer code: 3204120197
€15,60
The original Extruder Connection Board by Bambu Lab for the X1E is the central interface of the toolhead: it connects extruder and hotend, managing electrical signals and power supply so that all components work in sync. Stable connection for consistent print quality Direct replacement for the original board, minimal downtime Compatible with: Bambu Lab X1E
€12,90
Genuine Bambu Lab extruder Hall sensor board, a spare part for the Bambu Lab H2C printer. It detects position and movement inside the extruder, ensuring correct and reliable filament feeding. Genuine Bambu Lab spare part Compatible with: Bambu Lab H2C
€12,90
Precision craft knife by Vallejo with a slim aluminium handle and soft grip, supplied with a #11 blade for fine angled cuts, carving, engraving, trimming and deburring. The built-in magnetic end lets you safely pick up blades and small metal parts.Ideal for modellers, hobbyists and for finishing 3D prints.Sale prohibited to persons under 18 years of age. Keep the blade out of reach of children and animals.
€12,00
Vallejo Model Color Set Wargame Basics is a paint set ideal both for beginners and for experienced painters. The carefully selected palette covers the most used shades for painting historical, fantasy and strategy-game miniatures: skin tones, clothing, uniforms, leather details, equipment and metallic effects.Vallejo Model Color is the famous Vallejo range of acrylics with a high pigment concentration, excellent coverage and an even matt finish, developed for brush painting while preserving even the finest details.For optimal adhesion, colour fidelity and durability we recommend applying the paints on a surface treated with primer (e.g. Vallejo Surface Primer).
€38,50
The Vallejo Game Color Wash Set is the ideal complement for bringing out details and adding three-dimensional shading to your miniatures in just a few steps. The colour range is designed for shading skin tones, metal armour, leather, fabrics and organic textures.Contents (8 bottles of 18 ml): 73.200 Sepia Wash 73.201 Black Wash 73.202 Pale Grey Wash 73.203 Umber Wash 73.204 Flesh Wash 73.205 Green Wash 73.206 Blue Wash 73.207 Red Wash
€36,00
The Humbrol AG4305 flat brush set includes four synthetic brushes in sizes 3, 5, 7 and 10. Ideal for covering large surfaces, applying washes, weathering effects and applying decals with a smooth, professional finish. 4 flat brushes: sizes 3 / 5 / 7 / 10 Synthetic bristles Perfect for modelling and finishing 3D prints
€15,01
Vallejo Airbrush Cleaner cleans the airbrush gently but effectively: it dissolves paint residue and at the same time lubricates the mechanism, for smooth and reliable performance over time. Daily cleaning: run it through the airbrush after use to remove residue. Deep maintenance: leave the nozzle and valve to soak for a few hours (do not immerse the whole airbrush). Ideal after using Vallejo water-based acrylic paints.
€13,86
Vallejo Glaze Medium is a colourless acrylic medium to be mixed with acrylic paints to increase their flow and transparency and to slow down their drying. Perfect for soft blends, shading, glazes and for working with powder pigments. Increases transparency while maintaining excellent adhesion Improves the smoothness of the brushstroke Slows drying for more even transitions
€10,16
Vallejo Surface Primer (60 ml) creates a smooth, durable base before painting: it improves paint adhesion, makes the following coats easier to apply and increases the durability of the finished work. It dries quickly without covering the finest details. Adheres to plastic, resin, PVC, brass, white metal and wood Ideal for miniatures, model making and 3D prints in PLA and resin Can be applied with an airbrush or a brush Available in various colours.
€11,10
Vallejo Model Color Wargame Special: 16 paints of 18 ml for the detailed painting of historical miniatures, military models, fantasy and science fiction. A wide choice of special shades for skin tones, metallic details, camouflage patterns and bright effects: perfect for expanding your palette.Contents: 70.816 Basic Skintone, 70.845 Sunny Skin Tone, 70.854 Medium Olive, 70.833 German Camouflage Bright Green, 70.961 Sky Blue, 70.968 Flat Green, 70.918 Ivory, 70.957 Flat Red, 70.730 Yellow Fluorescent, 70.731 Magenta Fluorescent, 70.801 Brass, 70.861 Basic Steel, 70.863 Gunmetal Grey, 70.864 Natural Steel, 70.865 Oily Steel, 70.997 Silver.
€76,00
You have seen 216 out of 2804 products
The go-to destination in Italy for 3D printer spare parts and accessories. You'll find everything you need to keep your machine in top condition: nozzles, hotends, heater blocks, thermistors, stepper motors, belts, print beds, sensors, fans, motherboards, and much more.
Guaranteed compatibility with major brands: Creality, Flashforge, Anycubic, Bambu Lab, Prusa, Elegoo, and others. With our continuously updated stock, you can resolve any technical issue quickly.
