Set of 3 LOKLiK cutting mats with just the right level of tack: they hold the material firmly during cutting and release it without tearing, keeping their grip even after many uses. Dimensions: 34.8 x 37 cm Scraper included for cleaning the mat Available in Light Grip, Strong Grip and Fabric Grip versions
€11,20 - €11,52
Set of 6 square coasters in natural black slate from LaserPecker, ideal for laser engraving. Natural variations in texture and edges make every piece unique. Flat, dark surface: sharp, high-contrast engraving of logos, names and graphics Compatible with infrared lasers and fiber lasers Dimensions: 100 x 100 x 6 mm
€15,01
Rolled canvas set in A3 LOKLiK format, hard-wearing and versatile, for high-quality printing, cutting and heat transfer projects. Ideal for personal or professional creative use.BenefitsAn accessory designed to get the most out of the LOKLiK cutting plotter and your personalisation projects. Original LOKLiK product Precise, professional results Ideal for hobby use and small production runs Manufacturer: LOKLiK Manufacturer code: HH-HB-0001-US-L
€13,12
Original Flashforge LED PCBA replacement board for the printer's internal lighting.Why replace itWhen an electronic board fails, replacing only the affected module is far cheaper than changing the whole assembly. The original spare part comes already assembled and ready to connect. Original spare part, already assembled Plug-and-play fitting, no soldering Restores the original operation Manufacturer: Flashforge Manufacturer code: 30002089003
€13,50
Original replacement X-axis stepper motor cable for Flashforge New Finder.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40000004002
€12,00
Dedicated replacement cable for the X-axis end stop of the Flashforge New Finder: it connects the end stop to the motherboard and restores precise homing. Ideal if the original cable is damaged or gives intermittent contacts.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40000006002
€12,00
LED board connection cable for Flashforge New Finder.When to replace itIf the internal lighting does not turn on or works intermittently, the cause is often a crushed cable or a loose connector. Replacing the single original cable is the quickest and most cost-effective way to restore the connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40000253001
€12,00
Original replacement Z-axis end-stop cable for Flashforge Guider II.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40.999063001
€10,00
Original replacement Y-axis stepper motor cable for Flashforge Guider II.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40.999212001
€10,00
Original replacement Y-axis end-stop cable for Flashforge Guider II.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40.999047001
€10,00
Original replacement X-axis stepper motor cable for Flashforge Guider II.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that won't turn on or lost signals. Replacing the single original cable is the quickest and most cost-effective way to restore a proper connection to the motherboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable, reliable connection Manufacturer: Flashforge Manufacturer code: 40999210001
€10,00
Original replacement end stop cable for Flashforge Guider II.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that do not turn on or lost signals. Replacing the single original cable is the fastest and cheapest way to restore a proper connection to the mainboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable and reliable connection Manufacturer: Flashforge Manufacturer code: 40999230001
€10,00
Original replacement threaded pipe (throat) for Flashforge Guider 3 / Guider 3 Plus.Why replace itWorn or clogged hotend components cause under-extrusion, heat creep and failed prints. The original spare part brings extrusion back to factory performance. Original spare part, direct fit Consistent and reliable extrusion Reduces clogs and heat creep Manufacturer: Flashforge Manufacturer code: 80003154002
€15,01
Original Flashforge desiccant sachets (3 packages) for the sealed filament chambers of the Flashforge Guider 3 Plus and Guider 3 Ultra printers. They absorb moisture and keep spools dry both while printing and when the machine is idle, reducing stringing, bubbles and poor layer adhesion. 3 silica gel desiccant sachets Original spare part for the filament chambers of the Guider 3 Plus / Guider 3 Ultra Can also be used in spool storage boxes and airtight containers Manufacturer: Flashforge Manufacturer code: 20003470001
€10,50
Original replacement Y-axis pulley assembly for Flashforge Creator 3.Why replace itBelts and pulleys wear out with use: play, ghosting, inaccurate dimensions and uneven surfaces appear. The original spare part restores the correct tension and the precision of the axis movements. Original spare part, dimensions identical to the stock component Precise and repeatable movements Reduces vibrations, play and ghosting Manufacturer: Flashforge Manufacturer code: 20.000928001
€10,00
Replacement air filter set for Flashforge Creator 3.When to replace itFilters become saturated with use and lose their effectiveness at trapping particles and odours: replacing them periodically keeps the air in the working environment cleaner, especially when printing ABS, ASA and engineering materials. Original snap-in replacement part Traps particles and odours generated while printing Periodic replacement recommended Manufacturer: Flashforge Manufacturer code: 20.001062001
€10,00
Original replacement right X-axis motor cable for Flashforge Creator 3.When to replace itCrushed cables, loose connectors or intermittent contacts cause homing errors, motors that stall, screens that do not turn on or lost signals. Replacing the single original cable is the fastest and cheapest way to restore a proper connection to the mainboard. Original spare part with connectors already fitted Plug-and-play installation, no soldering Restores a stable and reliable connection Manufacturer: Flashforge Manufacturer code: 40.000389001
€10,00
Replacement HEPA filter for Flashforge Creator 4. It traps the particles generated during printing for a cleaner working environment.When to replace itFilters become saturated with use and lose their effectiveness at trapping particles and odours: replacing them periodically keeps the air in the working environment cleaner, especially when printing ABS, ASA and engineering materials. Original snap-in replacement part Traps particles and odours generated while printing Periodic replacement recommended Manufacturer: Flashforge Manufacturer code: 20002950001
€20,00
Original heating cartridge for the hotend of the Flashforge Creator 3 Pro. It delivers stable high-temperature performance for consistent extrusion.Why replace itA faulty heating cartridge causes temperature errors, under-extrusion and failed prints. The original spare part ensures fast and stable heating. Original spare part with identical specifications Stable temperature for consistent extrusion Simple replacement Manufacturer: Flashforge Manufacturer code: 30002129001
€12,00
Original print head mounting plate for Flashforge Adventurer 4.Why replace itThe mounting plate keeps the print head aligned and firmly secured to the carriage: if it is bent or damaged, play, vibrations and print defects appear. The original spare part restores correct mounting. Original Flashforge spare part Direct fit, no modifications Stable and correctly aligned print head Manufacturer: Flashforge Manufacturer code: 50002041003
€12,00
High-temperature nozzle assembly (up to 265 °C) of 0,6 mm for Flashforge Adventurer printers. It lets you print materials that require higher temperatures, with a larger nozzle for faster prints.Why replace itWorn or clogged hotend components cause under-extrusion, heat creep and failed prints. The genuine replacement part brings extrusion back to factory performance. Genuine replacement part, direct fit Consistent and reliable extrusion Reduces clogs and heat creep Manufacturer: Flashforge Manufacturer code: 20.002359001
€60,00
Original build plate assembly for Flashforge Adventurer 4, complete with flexible spring steel plate. The ideal spare part to restore adhesion and make removing prints easier.BenefitsA flat build surface in good condition is the basis of a perfect first layer. The original spare part has the exact dimensions of the stock build plate and installs with no modifications. Original dimensions, direct fit Excellent first layer adhesion Easier part removal at the end of the print Manufacturer: Flashforge Manufacturer code: 20002701001
€138,00
Genuine replacement Z axis belt for Flashforge AD5X.Why replace itWith use, belts and pulleys stretch or wear out: play, ghosting, inaccurate dimensions and uneven surfaces appear. The genuine replacement part restores the correct tension and the precision of the axis movements. Genuine replacement part, identical dimensions to the stock component Precise and repeatable movements Reduces vibrations, play and ghosting Manufacturer: Flashforge Manufacturer code: 20004231001
€11,01
Stepper motor for the channel change of the IFS system on the Flashforge AD5X, with blue connector. Genuine Flashforge replacement part for the multicolour feeding system.Why replace itA worn or damaged stepper motor causes skipped steps, shifted layers, noise and imprecise movements. The genuine replacement part has the same electrical and mechanical characteristics as the stock motor: it fits without modifications and does not require changing the firmware settings. Genuine replacement part, direct fit Restores precise positioning and smooth movements Same specifications as the stock motor: no firmware changes Manufacturer: Flashforge Manufacturer code: 20004659001
€14,00
You have seen 96 out of 468 products
Discover the latest new arrivals at Strato3D: new 3D printers, scanners, lasers, filaments, and materials just added to our catalog. We are constantly working to bring you the most innovative technologies and the most requested products by the Italian 3D printing community.
Check back often to see what's new: we continuously update our catalog with the best products on the market.
