Original Flashforge Hardened Nozzle Assembly - ⌀ 0.60 mm for the Adventurer 5M / 5M Pro. Spare part to restore or adapt the printer's extrusion.FeaturesOriginal Flashforge spare partCompatible with Adventurer 5M / 5M ProDiameter: ⌀ 0.60 mm
€34,00
Original Flashforge Mainboard Fan for the Adventurer 3. Genuine spare part to keep the printer running at its best.FeaturesOriginal Flashforge spare partCompatible with Adventurer 3
€10,00
Original Flashforge Extruder Assembly for the Adventurer 3 Pro 2 / Adventurer 4 Pro. Genuine spare part to keep the printer running at its best.FeaturesOriginal Flashforge spare partCompatible with Adventurer 3 Pro 2 / Adventurer 4 Pro
€72,00
Original Flashforge Nozzle Assembly for the AD5X. Spare part to restore or adapt the printer's extrusion.FeaturesOriginal Flashforge spare partCompatible with AD5X
€30,00
Original Flashforge 8015 Fan for the Guider 3 Plus / Guider 3 Ultra. Genuine spare part to keep the printer running at its best.FeaturesOriginal Flashforge spare partCompatible with Guider 3 Plus / Guider 3 Ultra
€12,00
Original Flashforge 2510 Fan for the AD5X. Genuine spare part to keep the printer running at its best.FeaturesOriginal Flashforge spare partCompatible with AD5X
€11,60
eufyMake UV DTF Laminating Machine: applies UV DTF films and transfers evenly and bubble-free, for professional stickers and decorations on a variety of surfaces.FeaturesEven, bubble-free UV DTF laminationFor professional stickers and decorationsIdeal companion to the eufyMake UV printer
€400,00
eSun PLA+ in Fire Engine Red: PLA+ filament, 1.75 mm, in a 1 kg format. Consistent quality and uniform colour for reliable FDM printing.FeaturesMaterial: PLA+Diameter: 1.75 mm — Format: 1 kgColour: Fire Engine RedTougher than standard PLA, high-quality surfaces
€17,60
Elegoo Centauri 2: new-generation enclosed CoreXY FDM 3D printer — fast, precise and built to print technical materials in a controlled environment.FeaturesHigh-speed CoreXY kinematicsEnclosed build chamber for technical materialsElegoo's excellent value for money
€256,25
Creality SPARKX i7 Autofill Combo: SPARKX i7 3D printer bundled with the automatic filament feeding system, for continuous and multicolour printing without manual intervention.FeaturesSPARKX i7 printerAutofill system includedAutomated filament feeding and switching
€250,00
Creality SpacePi SE: compact single-spool filament dryer that dries hygroscopic materials and keeps them dry while printing.FeaturesCompact 1-spool formatDrying temperature controlReduces stringing and moisture defects
€56,00
20 W fiber laser upgrade kit for the Creality Falcon T1: fiber module for marking and engraving metals and technical plastics with very high precision.Features20 W fiber laser moduleCompatible with Falcon T1Metal marking, high-definition engraving
€950,00
Creality Falcon T1 UV 5W: 5 W UV laser engraver for ultra-fine marking on plastic, glass, metal, leather and heat-sensitive materials.Features5 W UV laser sourceFine marking on plastic, glass, metal and leatherIdeal for delicate materials and tiny detail
€3.375,00
20 W diode laser upgrade kit for the Creality Falcon T1: adds or replaces the laser module, boosting cutting and engraving capability.Features20 W diode laser moduleCompatible with Falcon T1More power for fast cutting and engraving
€770,00 - €1.210,00
Creality Falcon A1C 10W in the white Basic version: compact enclosed diode laser engraver with 10 W optical power for safe operation. Ideal for engraving and cutting wood, acrylic, leather and more.FeaturesOptical power: 10 WEnclosed design for maximum safetyEngraves wood, acrylic, leather, paper and moreBasic version, white
€193,75 - €215,00
Creality Falcon A1C 10W with AI camera: enclosed diode laser engraver with 10 W optical power and a built-in camera for visual job positioning and monitoring.FeaturesOptical power: 10 WAI camera for positioning and job previewEnclosed design for maximum safetyEngraves wood, acrylic, leather, paper and more
€237,50 - €318,75
Original Bambu Lab laser upgrade kit for the H2S: turns the printer into a laser engraving and cutting platform, expanding its creative capabilities.FeaturesOfficial Bambu Lab kit for H2SAdds laser engraving and cutting functionsFull integration with the Bambu Lab ecosystem
€539,00
Aliencell X1 60W bundle: the most powerful version of the X1 diode laser engraver, with 60 W optical power and included material kit. For thick cuts and intensive production on wood, acrylic and other materials.Features60 W optical power diode laser moduleHighest cutting capacity in the X1 seriesSuitable for wood, acrylic, leather, cardboard and moreMaterial kit included
€1.498,75 - €2.415,00
Pack of 100 AlgoLaser aluminum business cards in purple, designed for customisation with laser engravers. The anodised metal surface delivers crisp, high-contrast engravings.FeaturesPack of 100 piecesMaterial: anodised aluminum, purpleIdeal for laser engraving logos, text and QR codesProfessional, durable results
€36,00
xTool M2 Color Craft – Laser cutting and engraving systemCMYK colour inkjet printing and 10W diode laser • Versatility: prints, cuts and engraves on a wide variety of materials.• Dual camera: smart positioning and real-time preview for always perfect alignment.• Ease of use: intuitive software with ready-to-use templates, to create without complications.• Endless applications: ideal for stickers, temporary tattoos, decorations and personalised gifts.• Class 1 safety: fully enclosed structure to work in complete safety.
€1.299,00 €1.032,29
Bambu Lab P1S COMBO – Professional, enclosed, high-performance 3D printer The Bambu Lab P1S is a fully enclosed CoreXY 3D printer, designed to deliver thermal stability and compatibility with technical materials. Intended for professional environments, advanced makers and prototype manufacturers, it combines precision mechanics, high speed and intelligent management of the printing process. The rigid metal frame, together with the enclosed system with active filtration, ensures optimal conditions for printing warp-prone materials such as ABS, ASA, PC and PET. The heated bed reaches 100 °C, while the all-metal hotend works up to 300 °C, supporting interchangeable nozzles from 0.2 to 0.8 mm. The CoreXY motion system allows printing speeds up to 500 mm/s, with acceleration up to 20 m/s², while maintaining high dimensional accuracy. The printer integrates a complete sensor system to monitor filament flow, detect anomalies and resume printing in the event of interruptions. Equipped with a touchscreen, an integrated camera and compatibility with the AMS unit for multicolor printing, the P1S is suited to intensive workflows and complex technical production. Integrated features Enclosed environment with active ventilation system and filter Filament runout detection and odometric control Automatic recovery after a power outage Vibration and flow compensation Camera for timelapse Connections: Wi‑Fi, microSD, LAN, Bluetooth Technical specifications Build volume: 256 × 256 × 256 mm Frame: all-metal Extruder: Direct Drive, all-metal 300 °C Heated bed: up to 100 °C Maximum speed: 500 mm/s (acc. 20,000 mm/s²) Compatible nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm Recommended materials: PLA, PETG, TPU, ABS, PC, ASA Dimensions: 389 × 389 × 458 mm Weight: 12.95 kg Power supply: max 1000 W @ 220 V The P1S is the ideal choice for anyone looking for reliability, versatility and quality in a ready-to-use professional 3D system.
€599,00 €549,00
The Bambu Lab X2D Combo – Print More Bundle pairs the dual-nozzle X2D printer with a second AMS 2 Pro and the Filament Track Switch. Automatic filament management goes from 4 to 8 slots: a single print can use up to 8 different colors or materials. What the bundle adds The second AMS 2 Pro brings four extra slots, with a brushless PMSM servo motor that moves filament about 60% faster than the previous generation: color changes slow the print down less. Each AMS 2 Pro integrates the drying module: it heats the filament up to 65 °C while rotating the spool for even drying, then keeps it sealed in a low-humidity environment. PA, PC and fiber-filled filaments stay ready to use for weeks. Bambu Lab filaments with RFID tags are recognized and the drying parameters set themselves. The Filament Track Switch removes the fixed pairing between AMS units and a single nozzle: without it, a filament loaded for one nozzle can only print from that one. With the switch, any filament from either AMS 2 Pro can be routed to the main or the auxiliary nozzle depending on what the job requires. The base: X2D dual nozzle Direct drive main nozzle with PMSM servo extruder, Bowden secondary optimized for supports, mechanical switching with no additional motors in the head. Enclosed chamber with flow-controlled Cool Mode and Heat Mode heated up to 65 °C: from PLA and PETG through to ABS, ASA, PC and filled nylons. Adaptive flow calibration, AI print monitoring and three-stage filtration with HEPA and activated carbon. Technical specifications Build volume 256 × 256 × 260 mm (main nozzle) — 235.5 × 256 × 256 mm (auxiliary or dual nozzle) Filament management 8 automatic slots included (2× AMS 2 Pro + Filament Track Switch) Expandability Up to 4 AMS 2 Pro and 8 AMS HT per hotend Print head Main direct drive PMSM servo; auxiliary Bowden with stepper; mechanical switching; integrated filament cutter; hardened steel gears Nozzle 0.4 mm hardened steel, tool-free quick release (supports 0.2 / 0.4 / 0.6 / 0.8 mm) Max nozzle temperature 300 °C Max bed temperature 120 °C Chamber Cool Mode and Heat Mode — max 65 °C Max speed / acceleration 1,000 mm/s — 20,000 mm/s² (main nozzle); 200 mm/s (auxiliary) Max hotend flow rate 40 mm³/s Build plate Flexible steel sheet with textured PEI included (compatible with Smooth PEI, Cool Plate SuperTack, Engineering Plate) Monitoring 1920 × 1080 Live View camera and 1600 × 1200 head camera; door, filament runout and tangle sensors; resume after power loss; optional Vision Encoder (50 micron) Filtration 3 stages: G3 pre-filter, HEPA H12, coconut shell activated carbon Dimensions / weight 392 × 406 × 478 mm — 16.25 kg (printer only) Price excluding VAT. Italian invoice and warranty. Technical support handled directly by Strato3D.
€1.179,00
Creality Pika is a 260 g handheld 3D scanner with dual scanning technology, built-in touchscreen and battery: hardware, processor and display in a single body, with no mandatory cables or PC to carry around. Dual light: blue laser and NIR The seven parallel blue laser lines mode is designed for fine details and complex geometries on small objects — models, mechanical components, figurines. NIR structured light is used for body scans, large objects and 24-bit colour capture. The removable NIR filters reduce interference in strong lighting conditions: the blue laser works up to 110,000 lux, the NIR mode with filters up to 80,000 lux. Pika also captures black and metallic surfaces without matting spray. Performance Accuracy up to 0.03 mm with the blue laser and 0.1 mm in NIR (laboratory values). Up to 110 fps on PC in laser mode, up to 40 fps on a mobile device. Anti-shake stabilisation allows freehand scanning while moving. Three connection modes Wireless PC via Wi-Fi, wireless mobile with a direct connection to the smartphone, and wired PC via USB 3.0 — the latter is the only one that enables marker-free laser scanning. Compatible with Windows, macOS, Android and iOS. AI-assisted processing CrealityScan includes AI Retexturing (applies textures from high-resolution photographs to the model), AI Hole Filling to close the holes of incomplete scans and AI Body Completion, which generates a full-figure model starting from the face scan plus a few photographs of the body. AI functions available on PC only. Export to STL, OBJ, PLY and ASC. Technical specifications Scanning technologies 7 parallel blue laser lines + NIR structured light Accuracy Up to 0.03 mm (blue laser) / 0.1 mm (NIR) 3D resolution 0.1–2 mm (blue laser) / 0.15–2 mm (NIR) Speed Up to 110 fps on PC / 40 fps on mobile (laser); 30 fps on PC / 20 fps on mobile (NIR) Working distance 160–400 mm (blue laser) / 200–1,000 mm (NIR) Minimum volume 10 × 10 × 10 mm (blue laser) / 50 × 50 × 50 mm (NIR) Maximum volume 2,000 × 2,000 × 2,000 mm Colour 24-bit full colour capture (NIR) Display 3" HD touchscreen, 500 nit peak brightness Connections Wi-Fi (PC and mobile), wired USB 3.0 Operating systems Windows, macOS, Android, iOS Export formats STL, OBJ, PLY, ASC Weight 260 g Manufacturer code 4008050066 EAN 6977905749737 Price excluding VAT. Italian invoice and warranty. Technical support handled directly by Strato3D.
€623,75
Bambu Lab A2L Cutting Full Combo is the complete package of the large-format A2L: a 330 × 320 × 325 mm printer, AMS Lite for automatic multi-colour and a cutting and drawing module. A single machine to 3D print, cut vinyl, paper and sheet materials, and draw with a pen. Three processes on one frame The module replaces the print head: cutting area 300 × 300 mm, drawing area 300 × 255 mm. Useful for anyone producing prototypes, packaging, stencils, stickers and decorations who does not want a second dedicated machine on the bench. Increased build volume Over 100% more space than 256 mm machines: large parts in one piece, fewer model cuts and less gluing. Suitable for cosplay props, RC components, functional prototypes and small series production. Stability and control Adaptive vibration compensation that recalibrates in real time according to the load on the bed, with dampers built into the frame: ghosting and ringing reduced even at high speeds. Direct drive extruder with closed-loop PMSM servo motor, extrusion monitoring and detection of clogs and blobs on the nozzle. Multi-colour and ecosystem AMS Lite included (4 filaments), up to 19 colours with additional AMS units, including the AMS 2 Pro and AMS HT units with active drying. Compatible with Bambu Studio, MakerWorld and the Bambu Handy app for sending prints and monitoring remotely. Technical specifications Build volume 330 × 320 × 325 mm Cutting area 300 × 300 mm Drawing area 300 × 255 mm Kinematics Cartesian (X/Y/Z), gantry frame Max speed / acceleration 500 mm/s — 10 m/s² Nozzle 0.4 mm quick-swap stainless steel (supports 0.2 / 0.4 / 0.6 / 0.8 mm), built-in filament cutter Max nozzle temperature 300 °C Max bed temperature 80 °C Build plate Flexible steel sheet with textured PEI (compatible with Engineering Plate and Cool Plate SuperTack Pro) Materials PLA, PETG, TPU and low-temperature materials — 1.75 mm filament, open system Multi-colour AMS Lite included (4 filaments), up to 19 colours with 4 additional AMS units Noise level Under 49 dB in silent mode, about 52 dB peak in standard mode Dimensions / weight 544 × 529 × 505 mm — 12.8 kg (printer only) Manufacturer code PF005-L+SA005-EU+SC006 Price excluding VAT. Italian invoice and warranty. Technical support handled directly by Strato3D.
€579,00
You have seen 288 out of 468 products
Discover the latest new arrivals at Strato3D: new 3D printers, scanners, lasers, filaments, and materials just added to our catalog. We are constantly working to bring you the most innovative technologies and the most requested products by the Italian 3D printing community.
Check back often to see what's new: we continuously update our catalog with the best products on the market.
