Slice Engineering 24V fan for Mosquito and Mosquito Magnum hotends: high-speed 25 mm box fan with Japanese bearings, 3.64 CFM, genuine Molex Micro-Fit 3.0 connector and 1 m extension cable included. Mounts directly with the included hardware.Features25 mm box fan, Japanese bearingsAirflow: 3.64 CFM, 24VMolex Micro-Fit 3.0 connector + 1 m extensionDirect mount on Mosquito / Mosquito Magnum
€12,00
Slice Engineering RepRap M6 GammaMaster Nozzle with a ⌀ 0.30 mm bore. Steel GammaMaster nozzle with non-stick coating, for high temperatures and engineering materials. Compatible with RepRap M6 threaded hotends.FeaturesNozzle diameter: ⌀ 0.30 mmSteel GammaMaster nozzle with non-stick coating, for high temperatures and engineering materials.Compatibility: RepRap M6 threaded hotends
€40,00
Slice Engineering Mosquito Silicone BootGenuine Slice Engineering accessory/spare part for 3D printers and machines: built to ensure precise compatibility, long-term reliability and consistent performance. An ideal upgrade or replacement to keep your machine always at its best.Genuine Slice Engineering product, sold and supported by STRATO3D with fast shipping from Italy.
€17,01
Slice Engineering PT1000 RTD 500C Temperature Sensor is a Slice Engineering 3D printing accessory offered by STRATO3D to improve the performance and maintenance of your printer.Brand: Slice Engineering
€42,00
Slice Engineering Thermal Paste - 5cc is a Slice Engineering 3D printing accessory offered by STRATO3D to improve your printer's performance and maintenance.Brand: Slice Engineering
€10,63
Slice Engineering Creality Ender Upgrade Kit is the complete upgrade kit from Slice Engineering for Creality Ender 3D printers. It replaces the original hotend with Slice Engineering components for high-temperature printing and printing with abrasive materials on Ender printers.Available from STRATO3D, distributor specialised in 3D printing components. Manufacturer: Slice Engineering Compatibility: Creality Ender SKU: SE-CREALITY-ENDER-UPGRADE
€113,75
Slice Engineering Copperhead Silicone Boot is the replacement silicone sock for the Slice Engineering Copperhead hotend. Silicone cover for thermal insulation of the Copperhead heater block; it reduces heat loss and protects against oozing filament.Available at STRATO3D, a distributor specialising in 3D printing components. Manufacturer: Slice Engineering Compatibility: Copperhead SKU: SE-COPPERHEAD-SILICONE-BOOT
€10,63
The Slice Engineering Raise3D Pro2 Upgrade Bundle is the complete upgrade kit from Slice Engineering for the Raise3D Pro2 3D printer. It replaces the original print head with Slice Engineering components for high-temperature and abrasive material printing.Available at STRATO3D, a distributor specialising in professional 3D printing components. Manufacturer: Slice Engineering Compatibility: Raise3D Pro2 SKU: SE-RAISE3D-PRO2-UPGRADE
€250,00
Slice Engineering Prusa Mini Copperhead Hotend Upgrade Kit is the Copperhead hotend upgrade kit from Slice Engineering, designed for the Prusa Mini printer. The Copperhead replaces the original hotend with a bi-metal version for printing technical materials up to 290°C.Available from STRATO3D, a distributor specializing in high-performance 3D printing components. Manufacturer: Slice Engineering Compatibility: Prusa Mini Hotend: Copperhead SKU: 301
€95,00
Slice Engineering Mako Hotend for Bambu Lab P1/P1P - GammaMaster FIN Nozzle is the Mako hotend with GammaMaster FIN nozzle from Slice Engineering, designed specifically for Bambu Lab P1 and P1P printers. It delivers maximum flow rate and extreme temperatures for high-performance technical materials.Available at STRATO3D, a distributor specializing in high-performance 3D printing components. Manufacturer: Slice Engineering Compatibility: Bambu Lab P1 / P1P Nozzle: GammaMaster FIN SKU: HOT02MAK41550
€130,33 - €136,86
Slice Engineering Mosquito Magnum Hotend is the Mosquito Magnum hotend by Slice Engineering. Designed for very high flow rates and extreme temperatures, ideal for high-speed printers with engineering materials and high-temperature reinforced filaments.Available at STRATO3D, distributor specialising in high-performance 3D printing components. Manufacturer: Slice Engineering Model: Mosquito Magnum SKU: 14201
€198,75
Original accessory and spare part for 3D printer — Allen screwdriver set, 4 sizes. Available at STRATO3D.
€32,83
€42,00
€40,00
Strato3D Product
€213,65
Strato3D Product
€206,00
Plastic Repellent PaintPlastic Repellent Paint™ is a revolutionary, water-based, PTFE nanosuspension that repels plastic from the outside of your nozzle and heat block. It prevents plastic buildup that causes print failures!
€20,80
€40,00
€220,00
€178,00
€41,01
3D Printer Filament Drying Desiccant Wet 3D printer filament can cause all sorts of issues. In fact, many of the issues that hotends or nozzles get blamed for can be traced back to filament that has absorbed too much moisture. Slice Engineering's facility is located in humid Florida, so they set out to find an easy way to keep humidity from killing their prints. 3D Printer Filament Drying Desiccant was the result. Usage To use your desiccant for 3D printer filament, simply remove the outer shrink wrap and pop off the cap, then insert the canister into the center of your filament spool. Store the spool in an airtight container and watch the humidity drop!
€27,20
Built to Withstand Abrasive FilamentsThe GammaMaster Fin nozzle is crafted from hardened tool steel with a protective wear-resistant coating. Perfect for materials like carbon-fiber-filled nylon, glow-in-the-dark PLA, or metal-effect-filled filaments, it maintains precision even under extended, high-speed use.Resistant All-Metal ConstructionThe Mako Hotend's titanium heat break and plated copper hot block ensure excellent thermal control and mechanical strength. Its all-metal design supports print temperatures up to 300°C, opening the door to engineering-grade materials without compromising longevity or performance.Seamless Drop-in CompatibilitySpecifically engineered to match the X1 and X1 Carbon platforms, this hotend integrates directly into the printer with no need for firmware changes or modifications. The design preserves all original functionality and ensures reliable, maintenance-friendly operation.For Demanding ApplicationsWhether you're printing lightweight structural parts or technical components with abrasive materials, the Mako Hotend with GammaMaster nozzle guarantees consistently sharp results. It's a reliable tool for users who demand precision, robustness, and printing freedom.
€208,53
Slice Engineering Raise3D E2 Upgrade BundleThe Slice Engineering Raise3D E2 Upgrade Bundle from Slice Engineering is a quality accessory for 3D printers, designed to improve the performance, durability, and versatility of your 3D printing setup. Compatible with leading printers and systems on the market. ✅ Guaranteed Quality – produced by Slice Engineering, a trusted brand in the 3D printing industry 🔧 Easy Installation – ready to use with major 3D printers 🎯 Improve Your Prints – accessory designed to optimize the printing process 📦 Fast Shipping – delivery across Italy from STRATO3D.it 🏷️ SKU: 14320 – available now at the best price Buy Slice Engineering Raise3D E2 Upgrade Bundle on STRATO3D.it – your specialized Italian online store for 3D printing, 3D scanners, laser engravers, and accessories. Competitive prices, fast shipping, and technical support in Italian.
€330,00
You have seen 24 out of 28 products
Slice Engineering is the American specialist in high-performance hotends, with the Mosquito and Copperhead models designed to print high-temperature technical materials such as PEEK, PC, loaded Nylon, and abrasive materials. Premium material construction and optimal thermal dissipation for every advanced application.
The choice for those who print with advanced technical materials and cannot compromise on the quality and reliability of the hotend.
