Forward AM
-
Forward AM Forward AM Ultrafuse PLA Tough
Ultrafuse® PLA ToughUltrafuse® PLA Tough is a highly versatile, biocompatible, and biobased material specially developed for the needs of professional users. It effortlessly accommodates validated high print speeds up to 300mm/s1, without the need for any hardware adjustment while offering exceptional surface finish and impressive impact strength. Moreover, it boasts a notably high success rate for large print jobs, ensuring a straightforward and cost-effective printing process.720% tougher than standard PLAUltrafuse® PLA Tough can be an alternative to ABS as it is more sustainable, tough, and easy to print. As it is compatible with water-soluble BVOH support material, this biocompatible material which exhibits impressive impact strength – 720% higher than standard PLA – is the perfect solution for printing complex geometries for demanding high-volume applications.Furthermore, Ultrafuse® PLA Tough parts can be enhanced by annealing the part in a separate process step, which can increase toughness by up to 230% and its heat resistance by 257%.Example ApplicationsJigs & fixturesOrthotics and ProsthesesFunctional PrototypingWith Ultrafuse® PLA Tough Filament, you can achieve sustainable, cost- and time-saving production of large components at rapid speeds while maintaining impeccable surface quality. Elevate your designs and projects to PRO levels with a filament that guarantees outstanding performance, reliability, and consistency.Material PropertiesTensile strength (MPa): 40 (xy), 28 (zx)Young´s modulus (MPa): 2672 (xy), 2576 (zx)Elongation at break (%): 7.4 (xy), 2.2 (zx)Impact Strength (kJ/m2): 33 (xy), 34 (xz), 10 (zx)Heat Resistance when Annealed (°C): 157 Vicat 10N, 94 HDT B 0.45MPaPrinting GuidelinesNozzle Temperature: 200-220 °CBed Temperature: 50 - 70 °CBed Material: GlassNozzle Diameter: ≥ 0.4 mmPrint Speed: 40 -3001 mm /s1. Fast printing might require an additional increase in nozzle temperature; the stated print speed of 300 mm/s is based on current validations. As equipment and technology continues to evolve, it is possible that even higher print speeds may be attainable in the future.
€237,90
-
Forward AM BASF Ultrafuse TPU 95A
Ultrafuse FlexiblesBuilding on BASF's decades of experience in flexible materials, this material is based on established thermoplastic polyurethane Elastollan, standing for maximum reliability, consistent product quality, and cost efficiency.TPU 95AWith its outstanding abrasion resistance, Ultrafuse TPU 95A presents an excellent choice for wear and tear applications. Parts printed with this material set themselves apart by high elongation at break, great layer adhesion, and good resistance to oils as well as industrially used chemicals.Tips & TricksNozzle temperature: 210-230°CBed temperature: 40 °CBuild Chamber Temperature: Passively heated, closed chamberNozzle diameter: ≥ 0.4 mmBed modification: Adheres to different print surface types (glass preferred)Print speed: 15-40mm/sMaterial PropertiesShore Hardness: 92Abrasion Resistance: 64 mm3Compression set 23°C, 72h: 38%Stress Break: 44.2 MPa (XY), 12.2 MPa (ZX)Elongation Break: 661 % (XY), 192 % (ZX)Tear Strength: 90 kN/m (XY), 8 kN/m (XZ), 14 kN/m (ZX)BASF Quality ControlThe best raw materials available are selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery guarantees truly consistent filament, also between colors and batches. It will perform as expected every time.All BASF products are 100% traceable to their source.
€52,80
-
Forward AM Forward AM Ultrafuse® ASA
Ultrafuse ASAUltrafuse ASA is a high-performance thermoplastic with similar mechanical properties to ABS. Ultrafuse ASA offers additional benefits such as high outdoor weather resistance. UV resistance, toughness, and rigidity make it an ideal material for 3D-printing applications.Ultrafuse ASA filament offers you the opportunity to 3D-print outdoor fixtures and appliances without losing its properties or color.Material PropertiesTensile Strength (MPa): 12.0 (ZX), 34.6 (XY)Flexural Modulus (MPa): 1041 (ZX), 1638 (XZ), 1733 (XY)Elongation Break: 1.0 % (ZX), 4.5 % (XY)Impact Strength Izod notched (kJ/m2): 1.9 (ZX), 11.4 (XZ), 8.7 (XY)Impact Strength Izod unnotched (kJ/m2): 6.8 (ZX), 39.3 (XZ), 36.8 (XY)HDT @ 0.45 MPa: 101 oCBASF Quality ControlThe best raw materials available are selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery guarantees truly consistent filament, also between colors and batches. It will perform as expected every time.All BASF products are 100% traceable to source.
€51,20
-
Forward AM Forward AM Ultrafuse PLA Tough
Ultrafuse® PLA ToughUltrafuse® PLA Tough is a highly versatile, biocompatible, and biobased material specially developed for the needs of professional users. It effortlessly accommodates validated high print speeds up to 300mm/s1, without the need for any hardware adjustment while offering exceptional surface finish and impressive impact strength. Moreover, it boasts a notably high success rate for large print jobs, ensuring a straightforward and cost-effective printing process.720% tougher than standard PLAUltrafuse® PLA Tough can be an alternative to ABS as it is more sustainable, tough, and easy to print. As it is compatible with water-soluble BVOH support material, this biocompatible material which exhibits impressive impact strength – 720% higher than standard PLA – is the perfect solution for printing complex geometries for demanding high-volume applications.Furthermore, Ultrafuse® PLA Tough parts can be enhanced by annealing the part in a separate process step, which can increase toughness by up to 230% and its heat resistance by 257%.Example ApplicationsJigs & fixturesOrthotics and ProsthesesFunctional PrototypingWith Ultrafuse® PLA Tough Filament, you can achieve sustainable, cost- and time-saving production of large components at rapid speeds while maintaining impeccable surface quality. Elevate your designs and projects to PRO levels with a filament that guarantees outstanding performance, reliability, and consistency.Material PropertiesTensile strength (MPa): 40 (xy), 28 (zx)Young´s modulus (MPa): 2672 (xy), 2576 (zx)Elongation at break (%): 7.4 (xy), 2.2 (zx)Impact Strength (kJ/m2): 33 (xy), 34 (xz), 10 (zx)Heat Resistance when Annealed (°C): 157 Vicat 10N, 94 HDT B 0.45MPaPrinting GuidelinesNozzle Temperature: 200-220 °CBed Temperature: 50 - 70 °CBed Material: GlassNozzle Diameter: ≥ 0.4 mmPrint Speed: 40 -3001 mm /s1. Fast printing might require an additional increase in nozzle temperature; the stated print speed of 300 mm/s is based on current validations. As equipment and technology continues to evolve, it is possible that even higher print speeds may be attainable in the future.
€31,72
-
Forward AM BASF Ultracur3D Flexible UV Resin EL 150 - 1 kg - Clear
Ultracur3D EL 150Ultracur3D EL 150 is a very versatile reactive urethane photopolymer for highly elastic applications that ensures medium softness (77 Shore D). It offers an optimal combination of high torsional strength, good elongation at break, and long-term rebound.Example ApplicationsFootwearPrototypingCushioning padsFlexible gripMaterial PropertiesRebound resilience: 28 %Tear strength (Graves): 14 N/mmElongation at break: 182 %Hardness: 77
€109,80
-
Forward AM BASF Ultrafuse Support Layer
Ultrafuse Support LayerUltrafuse Support Layer is a filament developed to be used in combination with Ultrafuse metal effect filaments. When printed between supports and the object, it creates a barrier during sintering and facilitates the separation of supports from the metal effect part. Ultrafuse Support Layer is not developed to print stand-alone parts and should be printed as a layer attached to support structures in dual extrusion prints.BASF Quality ControlThe best raw materials available are selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery guarantees truly consistent filament, also between colors and batches. It will perform as expected every time.All BASF products are 100% traceable to source.
€109,80
-
Forward AM Forward AM Ultrafuse PLA
Ultrafuse PLAUltrafuse PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with, and Ultrafuse PLA gives smooth printing results. This most used 3D printing material is available in a wide range of RAL colors and translucent variants.When properly cooled, PLA has a higher maximum printing speed, lower layer heights, and sharper printed corners. Combining this with the low warping of print makes it a popular plastic for makers, prosumers, and schools.Tips & TricksPrint Temperature: 210-220 degreesHeated Bed: 60 degreesPrint Speed: 30-80 mm/sMaterial PropertiesTensile Strength (MPa): 21.2 (ZX), 34.7 (XY)Flexural Modulus (MPa): 1715 (ZX), 1708 (XZ), 1860 (XY)Elongation Break: 1.2 % (ZX), 4.2 % (XY)Impact Strength Izod notched (kJ/m2): 1.6 (ZX), 2.1 (XZ), 3.3 (XY)Impact Strength Izod unnotched (kJ/m2): 4.7 (ZX), 9.6 (XZ), 11.0 (XY)HDT @ 0.45 MPa: 65 oCBASF Quality ControlThe best raw materials available are selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery guarantees truly consistent filament, also between colors and batches. It will perform as expected every time.All BASF products are 100% traceable to source.
€187,88
-
Forward AM Forward AM Ultracur3D Rigid UV Resin RG 35 - 1 kg - Clear
Ultracur3D RG 35Ultracur3D RG 35 is a medium-viscosity, highly reactive urethane photopolymer for rigid applications that offers very high stability and stiffness, good temperature resistance, and low water uptake. It is very well suited for 3D printing high-performance functional parts.Example ApplicationsAutomotive housingsJigs and fixturesMolds and insertsElectrical castingsMaterial PropertiesYoung’s modulus: 2600 MPaYoung’s modulus: 2600 MPaHeat deflection temperature: 83°CHardness: 85 D
€91,50
-
Forward AM Forward AM Ultrafuse PET
Ultrafuse PETUltrafuse PET is made from premium, food-approved PET (Polyethylene terephthalate). PET is widely used to produce food and beverage containers and bottles. This high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy handling. Ultrafuse PET is as easy as PLA, but is much stronger. The filament has a large operating window for printing (temperature vs. speed), so it can be used on every 3D printer. Ultrafuse PET can be 100% recycled, is watertight and has great colors and finish.Tips & TricksTemperature: 210 degreesHeated Bed: 75 degreesSpeed: between 30 and 70mmMaterial PropertiesTensile Strength (MPa): 17.2 (ZX), 33.4 (XY)Flexural Modulus (MPa): 1826 (ZX), 1840 (XZ), 2063 (XY)Elongation at Break: 1.1 % (ZX), 2.7 % (XY)Impact Strength Izod notched (kJ/m2): 1.8 (ZX), 1.9 (XZ), 2.1 (XY)Impact Strength Izod unnotched (kJ/m2): 4.1 (ZX), 7.7 (XZ), 12.3 (XY)HDT @ 0.45 MPa: 63 oC
€20,13
-
Forward AM Forward AM Ultracur3D Flexible UV Resin EL 4000 - 1 kg - Clear
Ultracur3D EL 4000Ultracur3D EL 4000 is the latest addition to our flexible and elastomeric resins. With its high hardness of Shore 90, it is at the high end of our portfolio, which now covers the whole spectrum from Shore 40 to 90. Due to its superior strength, rebound, and tear resistance, this material is perfectly suitable for applications such as footwear, bike saddles, and cushioning pads.Example ApplicationsFootwearBike saddlesCushioning padsMaterial PropertiesElongation at break: 172 %Hardness: 90 ARebound resilience: 30 %Tear Strength (Graves): 37 N/mm
€112,85
-
Forward AM Forward AM Ultrafuse PET
Forward AM Ultrafuse PETThe Forward AM Ultrafuse PET from Forward AM is a quality accessory for 3D printers, designed to improve the performance, durability, and versatility of your 3D printing setup. Compatible with major printers and systems on the market. ✅ Guaranteed Quality – produced by Forward AM, a reliable brand in the 3D printing industry 🔧 Easy Installation – ready to use with major 3D printers 🎯 Enhance your prints – accessory designed to optimize the printing process 📦 Fast Shipping – delivery throughout Italy from STRATO3D.it 🏷️ SKU: Pet-0317a075 – available now at the best price Buy Forward AM Ultrafuse PET on STRATO3D.it – your Italian online store specializing in 3D printing, 3D scanners, laser engravers, and accessories. Competitive prices, fast shipping, and technical support in Italian.
€33,01
-
Forward AM BASF Ultracur3D Color Kit - 0.5kg v2
BASF Ultracur3D Color Kit - 0,5kgThe BASF Ultracur3D Color Kit - 0.5kg from Forward AM is a quality accessory for 3D printers, designed to improve the performance, durability, and versatility of your 3D printing setup. Compatible with major printers and systems on the market. ✅ Guaranteed Quality – produced by Forward AM, a reliable brand in the 3D printing sector 🔧 Easy Installation – ready to use with major 3D printers 🎯 Enhance Your Prints – accessory designed to optimize the printing process 📦 Fast Shipping – delivery throughout Italy from STRATO3D.it 🏷️ SKU: 300118 – available now at the best price Buy BASF Ultracur3D Color Kit - 0.5kg on STRATO3D.it – your Italian online store specializing in 3D printing, 3D scanners, laser engravers, and accessories. Competitive prices, fast shipping, and technical support in Italian.
€104,00
-
Forward AM BASF Ultracur3D Color Kit - 0.5kg
BASF Ultracur3D Color Kit - 0.5kg The BASF Ultracur3D Color Kit - 0.5kg from Forward AM is a quality accessory for 3D printers, designed to improve the performance, durability, and versatility of your 3D printing setup. Compatible with leading printers and systems on the market. ✅ Guaranteed quality – produced by Forward AM, a reliable brand in the 3D printing sector 🔧 Easy installation – ready to use with major 3D printers 🎯 Enhance your prints – accessory designed to optimize the printing process 📦 Fast shipping – delivery throughout Italy from STRATO3D.it 🏷️ SKU: 300122 – available now at the best price Buy BASF Ultracur3D Color Kit - 0.5kg on STRATO3D.it – your Italian online store specializing in 3D printing, 3D scanners, laser engravers, and accessories. Competitive prices, fast shipping, and technical support in Italian.
€104,00
-
Forward AM Forward AM Ultrafuse PP
Forward AM Ultrafuse PPThe Forward AM Ultrafuse PP by Forward AM is a quality accessory for 3D printers, designed to improve the performance, durability, and versatility of your 3D printing setup. Compatible with major printers and systems on the market. ✅ Guaranteed Quality – produced by Forward AM, a reliable brand in the 3D printing sector 🔧 Easy Installation – ready to use with major 3D printers 🎯 Enhance Your Prints – accessory designed to optimize the printing process 📦 Fast Shipping – delivery across Italy from STRATO3D.it 🏷️ SKU: PP-4401a070 – available now at the best price Buy Forward AM Ultrafuse PP on STRATO3D.it – your Italian online store specializing in 3D printing, 3D scanners, laser engravers, and accessories. Competitive prices, fast shipping, and technical support in Italian.
€65,60
You have seen 38 out of 38 products