Brand — QiDi

The QIDI Max 4 Combo 3D printer from QiDi is an FDM 3D printer designed for those seeking quality and reliability. Suitable for both experienced makers and 3D printing newcomers. QIDI Max 4 Combo 3D printer QIDI Max 4 is an advanced 3D printer designed for large projects and working with demanding materials. Its large workspace, high head temperature, and active chamber heating allow you to print both standard filaments and engineering materials. The CoreXY design, fast closed-loop motors, and extensive cooling system ensure that the device works quickly, stably, and precisely. Large workspace The QIDI Max 4 offers a workspace of 390 × 390 × 340 mm. Such a large print volume allows you to create large models in one piece without having to divide the project into smaller parts. This saves you time on assembly and maintains the strength of the finished model. High print head temperature for technical materials The print head reaches a temperature of up to 370°C, which allows you to work with a wide range of filaments – from PLA and PETG to more demanding materials such as PC or carbon fiber composites. The ceramic throat and improved heat dissipation module reduce the risk of nozzle clogging, keeping printing stable even at high temperatures. Active chamber heating The third generation of active chamber heating reaches temperatures of up to 65°C. Combined with the air circulation system, this creates a stable environment for printing materials that are prone to deformation. As a result, even large models made of PLA or ABS retain their geometry and do not curl at the edges. Very fast and precise printing The use of FOC stepper motors in a closed loop increases drive efficiency by up to 65%. The maximum printing speed reaches 800 mm/s, and the acceleration reaches 30,000 mm/s². This configuration significantly reduces project completion time while maintaining high accuracy. Stable CoreXY design The CoreXY motion system with 10 mm wide 1.5GT belts ensures high rigidity and accuracy of the head guidance. The X-axis uses a high-hardness linear guide, the Y-axis uses 12 mm steel shafts, and the Z-axis uses four guides and two independent motors with trapezoidal screws. This allows the printer to remain stable even with large and heavy models. Automatic leveling and print control The printer is equipped with automatic table leveling with a load cell sensor integrated into the hot end. The monitoring system includes a filament end sensor, an AI camera, and a print resume function after a power failure. This makes the printing process safer and requires less manual control. Air filtration and convenient operation The QIDI Max 4 has a 3-stage air filtration system consisting of a G3 pre-filter, HEPA H12 filter, and activated coconut carbon. The printer is also equipped with a 5-inch touch screen, Wi-Fi and Ethernet connectivity, and a 1080p camera for viewing and recording timelapse footage of the printing process. Package contents Filament holder with pneumatic head Filament spool holder Holder cover Case door handle Spare parts kit Mechanism maintenance oil 7 mm wrench Power cord Ethernet cable USB flash drive with software and files Flat screwdriver Adhesive for the work surface to improve print adhesion Set of Allen keys (H1.27, H1.5, H2, H2.5, H3) Scraper for removing prints from the table   Manufacturer QiDi Model Max 4 Working area 390 × 390 × 340 mm Printer dimensions 558 × 578 × 612 mm Weight 40 kg Maximum head temperature up to 370°C Maximum table temperature up to 120°C Chamber temperature up to 65°C (active heating – 3rd generation) Maximum print speed 800 mm/s Maximum acceleration 30,000 mm/s² Extruder Direct Drive, hardened steel double gears Supported filaments PLA, ABS, ASA, PETG, TPU, PA, PC, carbon fiber and glass fiber composites Filament diameter 1.75 mm Material flow 40 mm³/s Automatic leveling yes (load cell sensor in the hotend) Filament sensor yes – filament end detection Air filter 3-in-1: G3 + HEPA H12 + activated carbon Camera 1080p with timelapse support Connectivity Wi-Fi 2.4/5 GHz, Ethernet, USB Memory 32 GB eMMC + USB 2.0 Screen 5" touchscreen 800 × 480 Supported file formats STL, OBJ, 3MF, STEP, STP Software QIDI Studio, OrcaSlicer, PrusaSlicer, and others Power supply 110V / 220–240V AC, 50/60 Hz Rated power 150 W + 500 W (chamber heating) + 700 W (heating bed) Technical Specifications Supported filaments PLA, PETG, PET Download the manual https://files.innpro.pl/QiDi/744581222566 Product Information Brand: QiDi Model code: max4combo EAN code: 744581222566 Weight: 76071 g Category: 3D Printers Buy QIDI Max 4 Combo 3D printer online at Strato3D.it — your specialized store for drones, 3D printers, lasers, and 3D scanners. Shipping throughout Italy. Pre and post-sales support.

Read more less

The QIDI Max 4 3D printer from QiDi is an FDM 3D printer designed for those seeking quality and reliability. Suitable for both experienced makers and 3D printing novices. QIDI Max 4 3D printer The QIDI Max 4 is an advanced 3D printer designed for large projects and working with demanding materials. The large workspace, high head temperature, and active chamber heating allow you to print both standard filaments and engineering materials. The CoreXY design, fast closed-loop motors, and extensive cooling system ensure that the device works quickly, stably, and precisely. Large workspace The QIDI Max 4 offers a workspace of 390 × 390 × 340 mm. Such a large print volume allows you to create large models in one piece without having to divide the project into smaller parts. This saves you time on assembly and maintains the strength of the finished model. High print head temperature for technical materials The print head reaches a temperature of up to 370°C, which allows you to work with a wide range of filaments – from PLA and PETG to more demanding materials such as PC or carbon fiber composites. The ceramic throat and improved heat dissipation module reduce the risk of nozzle clogging, keeping printing stable even at high temperatures. Active chamber heating The third generation of active chamber heating reaches temperatures of up to 65°C. Combined with the air circulation system, this creates a stable environment for printing materials that are prone to deformation. As a result, even large models made of PLA or ABS retain their geometry and do not curl at the edges. Very fast and precise printing The use of FOC stepper motors in a closed loop increases drive efficiency by up to 65%. The maximum printing speed reaches 800 mm/s, and the acceleration reaches 30,000 mm/s². This configuration significantly reduces project completion time while maintaining high accuracy. Stable CoreXY design The CoreXY motion system with 10 mm wide 1.5GT belts ensures high rigidity and accuracy of the head guidance. The X-axis uses a high-hardness linear guide, the Y-axis uses 12 mm steel shafts, and the Z-axis uses four guides and two independent motors with trapezoidal screws. This allows the printer to remain stable even with large and heavy models. Automatic leveling and print control The printer is equipped with automatic table leveling with a load cell sensor integrated into the hot end. The monitoring system includes a filament end sensor, an AI camera, and a print resume function after a power failure. This makes the printing process safer and requires less manual control. Air filtration and convenient operation The QIDI Max 4 has a 3-stage air filtration system consisting of a G3 pre-filter, HEPA H12 filter, and activated coconut carbon. The printer is also equipped with a 5-inch touch screen, Wi-Fi and Ethernet connectivity, and a 1080p camera for viewing and recording timelapse footage of the printing process. Package contents Filament holder with pneumatic head Filament spool holder Holder cover Case door handle Spare parts kit Mechanism maintenance oil 7 mm wrench Power cord Ethernet cable USB flash drive with software and files Flat screwdriver Adhesive for the work surface to improve print adhesion Set of Allen keys (H1.27, H1.5, H2, H2.5, H3) Scraper for removing prints from the table   Manufacturer QiDi Model Max 4 Working area 390 × 390 × 340 mm Printer dimensions 558 × 578 × 612 mm Weight 40 kg Maximum head temperature up to 370°C Maximum table temperature up to 120°C Chamber temperature up to 65°C (active heating – 3rd generation) Maximum print speed 800 mm/s Maximum acceleration 30,000 mm/s² Extruder Direct Drive, hardened steel double gears Supported filaments PLA, ABS, ASA, PETG, TPU, PA, PC, carbon fiber and glass fiber composites Filament diameter 1.75 mm Material flow 40 mm³/s Automatic leveling yes (load cell sensor in hotend) Filament sensor Yes – filament end detection Air filter 3-in-1: G3 + HEPA H12 + activated carbon Camera 1080p with timelapse support Connectivity Wi-Fi 2.4/5 GHz, Ethernet, USB Memory 32 GB eMMC + USB 2.0 Screen 5" touchscreen 800 × 480 Supported file formats STL, OBJ, 3MF, STEP, STP Software QIDI Studio, OrcaSlicer, PrusaSlicer, and others Power supply 110V / 220–240V AC, 50/60 Hz Rated power 150 W + 500 W (chamber heating) + 700 W (heating table) Technical Specifications Printing speed (mm/s) 800 Supported filaments PLA, PETG, TPU, ABS, ASA, PA Download the manual https://files.innpro.pl/QiDi/744581222559 Product Information Brand: QiDi Model code: MAX4qidi EAN code: 744581222559 Weight: 76071 g Category: 3D Printers Buy QIDI Max 4 3D printer online at Strato3D.it — your specialized store for drones, 3D printers, lasers, and 3D scanners. Shipping throughout Italy. Pre- and post-sales support.

Read more less

QiDi Q2 Combo, fast and precise FDM 3D printer. Print volume 320x320x320mm. Speed up to 500mm/s. Combo package with accessories. Rigid aluminum structure for high-quality prints.

Read more less

QiDi Q2C Combo, high-speed FDM 3D printer. Print volume 350x350x350mm. Speed up to 600mm/s. Multi-material compatible. 7" touchscreen. Combo package with accessories included.

Read more less